General discussion

Locked

Emachines T2862 Memory upgrade

By eraser3498 ·
Recently I tried to upgrade my memory in my emachines T2862 Desktop computer from 256MB to 512MB but it continues to only recogonize the first slot as 256MB and the second as nothing installed. After trying serval different combonations of memory I tried looking is bios for memory configuration options but with no luck. The memory option are locked out. I also tried to find a Bios update for it but another dead end. I was wondering if anyone had a solution for this problem any and all help is greatly appreciated.
Memory Specs are as follows Samsung PC2700 CL 2.5 2556MB and a Samsung PC2700 CL2.5 512MB. Motherboard is suppose to be able to handle up to 2GB of memory over 2 Slots. Also I get this message on boot up Memory is set to the lowest possible speed 200MHZ do you wish to try and boot yes or no. Thanks again for the help.

This conversation is currently closed to new comments.

5 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Comments

Collapse -

by BFilmFan In reply to Emachines T2862 Memory up ...

Did you check their website and the owner's manual for the type and slot configuration for memory modules?

Collapse -

by eraser3498 In reply to

Yes I did look in the owner's manual for slot configuration and by what it says in there it should be working.

Collapse -

by Black Panther In reply to Emachines T2862 Memory up ...

Maybe this can help

http://www.pcguide.com/ts/x/comp/ram/recogBanks-c.html


http://www.pcguide.com/ts/x/ggen01.htm

Collapse -

by eraser3498 In reply to

Poster rated this answer.

Collapse -

by eraser3498 In reply to Emachines T2862 Memory up ...

This question was closed by the author

Back to Hardware Forum
5 total posts (Page 1 of 1)  

Related Discussions

Related Forums