Discussion Locked

enabling AGP

0 helpful
11 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have used AIDA32 to check my computer. They reccommend that AGP be enabled.
1. AGP Version: 1.00
2. AGP Status: disabled
3. AGP Aperature Size 64MB
4.Supported AGP speeds: 1x, 2x
5. Current AGP speed: 2x6. Fast-write: Not supported
6. Side Band
Addressing: Supported, Disabled
How do I enable AGP and is it possible given the above information?

Thanks

11 replies

by tedyoyo

To enable agp you need to restart the computer and enter the cmos setup. Then goto advanced configuration and look for AGP video. Every cmos setup is differant so it may be located in another location of the cmos, but it is usually enabled by default setup.

by sbhuck

Never found my cmos, butr dod fond my BIOS, but nothing there showing AGP either enabled or disabled

by thechas

If you have an AGP card, or on-board AGP video, you may need to re-install the AGP mini-port driver for the chip-set on the motherboard.

If this is a name brand system, you should be able to download the driver from the manufacture.

If not, AIDA32 should have given you enough data to locate the motherboard or chipset mfg.

There are links to nearly every motherboard mfg at www.motherboards.org

Chas

by sbhuck

I tried tis and sent my computer into fits. Which took me three days to straighten out.

by sbhuck

I read the articles from answere 1. They only further confused me as to whether I wanted to enable it or not.
In the second answer, I can access my BIOS settings,, but nothing about cmos.
This is more confusing than trying ot upgrade my BIOS fromaward Modular BIOS v6.0 to something better. I have gotten as many different answers to that question as the enabling of my AGP.
I obviously need more information. I have downloaded three upgrades, but for various reaasons they will not work.
I am now going to try the third answer and see if that yields anything.
Thanks guys

by thechas

I will attempt to answer some of your questions in your comments.

BIOS is the program that your computer runs at boot to start things running so that the operation system and software on your hard drive can load and run.

CMOS is a special typeof memory where the data for the BIOS setup settings are stored. It is a low power consumption technology, and the data can be saved for a long period of time with a small battery for power.

You are usually limited to staying with the version ofthe CORE BIOS code that came with your PC. Be it Award or AMI, very seldom can you switch to a completely different BIOS.
What you can do, is get updates for your SPECIFIC motherboard from the motherboard or PC manufacture.
There are 3rd party companies that for a FEE will create a CUSTOM BIOS for you.
Very seldom is this worth the $70 or so that they charge.
Further, you should ONLY update your BIOS WHEN the update corrects a SPECIFIC problem that you have.

It is possible that your BIOS setting for first display type is set to PCI, and you have an AGP card installed.
Changing this setting to AGP can speed up the boot process slightly, but has little impact on overall performance.

Also, if installing the AGP mini-port driver messed up your PC, you either installed the wrong driver, or have deeper problems with the PC.

The ONLY time I have had problems with ANY motherboard driver was when the driver was the WRONG driver for the board in question.

continued:

by thechas

Here is what I do to 'optimize' AGP performance when I setup a system:

BIOS settings:
Initial or first display: AGP
AGP mode: (fastest supported by the card)
AGP Aperture: 2X video RAM up to 1/2 system RAM
Other settings if and as specified by the card mfg in their instructions or readme file.

Driver installation sequence:
Chip-set drivers
DirectX (at least the version specified for the video driver)
Video driver from the manufactures web site
Display driver if the display is notlisted in the default display list, or the manufacture provides a specific driver.

It is IMPORTANT to shut down ALL running programs when installing drivers from within Windows.

Chas

This discussion is closed to new replies.