Question Locked

Entering the WinXP OS externally via Adapter

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Currently my OS of XP keeps doing memory dumps at start up right before the log on screen appears. I have another computer that I can merge to and am able to just wipe the drive and start new after that. However, I still need some of the data remnant on my main profile of XP. It's not the administrator, if it was I would be able to access it, but when I try from another XP machine I recieve the error messege that my access is denied. What I'm curious about is can I bypass the directory lock by using something like say, linux, and copy the files from there. ( I know the Directory Paths that I want to copy so that shouldn't b an issue. Or someway to diagnosis and repair my original XP OS. I already tried the recovery console on my XP disc, but was at a loss of what I should do. I didn't really know what actually happened so i didn't want to act prematurely. If anyone could offer their advice on my particular conundrum it would be greatly appreciated. Thanks.

4 replies

by rob miners

to copy the last couple of Minidumps and use WinDebug to analise them to find out what is causing the problem. Minidump Files can be found here. C:\WINDOWS\Minidump\Mini******-**.dmp

How to read the small memory dump files that Windows creates for debugging

http://support.microsoft.com/kb/315263

To download and install the Windows debugging tools, visit the following Microsoft Web site:

http://www.microsoft.com/whdc/devtools/debugging/default.mspx

Instructions on using Windbg.

Open Windbg and select file, Symbol file path and brows to the Symbol folder that you have downloaded and installed Symbols to, select OK.

Close the workpage and save the Workspace information. This should lock in the Symbol path.

Open Windbg and select file and select Open Crash Dump then navigate to the minidump, highlight it and select Open.

There are two ways to use !analyze -v the easiest is to click on !analyze -v under Bugcheck Analysis.

When you have ran the initial dump if you look to the bottom of the screen you will see kd> to the right of that type in !analyze -v and press the Enter key.

Ctrl + a will let you copy the information and paste it into notepad.

Look to the bottom of the page for information like this. This was fixed by updating the Graphics Drivers.

FAULTING_THREAD: 864f6a98

DEFAULT_BUCKET_ID: GRAPHICS_DRIVER_FAULT

CUSTOMER_CRASH_COUNT: 1

BUGCHECK_STR: 0xEA

PROCESS_NAME: logon.scr

LAST_CONTROL_TRANSFER: from 00000000 to bfef0fea

STACK_TEXT: f6434e6c 00000000 00000000 00000000 00000000 sgiul50!DrvBitBlt+0x585

STACK_COMMAND: .thread 0xffffffff864f6a98 ; kb

FOLLOWUP_IP: sgiul50!DrvBitBlt+585 bfef0fea 75f9 jne sgiul50!DrvBitBlt+0x580 (bfef0fe5)

SYMBOL_STACK_INDEX: 0

SYMBOL_NAME: sgiul50!DrvBitBlt+585

FOLLOWUP_NAME: MachineOwner

MODULE_NAME: sgiul50

IMAGE_NAME: sgiul50.dll

DEBUG_FLR_IMAGE_TIMESTAMP: 3b7dfec7

FAILURE_BUCKET_ID: 0xEA_IMAGE_sgiul50.dll_DATE_2001_08_18

BUCKET_ID: 0xEA_IMAGE_sgiul50.dll_DATE_2001_08_18

Keep us informed as to your progress if you require further assistance.

If you think that any of the posts that have been made by all TR Members, have solved or contributed to solving the problem, please Mark them as Helpful so that others may benefit from the outcome. ;) :D

by oh smeg

On the now nonfunctioning computer. If it was just a Password you need to Take Ownership of the Files/Folders by following the directions here

http://support.microsoft.com/default.aspx?scid=kb;en-us;308421

[i]How to take ownership of a folder
Note You must be logged on to the computer with an account that has administrative credentials. If you are running Microsoft Windows XP Home Edition, you must start the computer in safe mode, and then log on with an account that has Administrative rights to have access to the Security tab.

If you are using Windows XP Professional, you must disable Simple File Sharing. By default, Windows XP Professional uses Simple File sharing when it is not joined to a domain.

For additional information about how to do this, click the following article number to view the article in the Microsoft Knowledge Base:
307874 (http://support.microsoft.com/kb/307874/) How to disable simplified sharing and set permissions on a shared folder in Windows XP
To take ownership of a folder, follow these steps: 1. Right-click the folder that you want to take ownership of, and then click Properties.
2. Click the Security tab, and then click OK on the Security message (if one appears).
3. Click Advanced, and then click the Owner tab.
4. In the Name list, click your user name, or click Administrator if you are logged in as Administrator, or click the Administrators group. If you want to take ownership of the contents of that folder, select the Replace owner on subcontainers and objects check box.
5. Click OK, and then click Yes when you receive the following message:
You do not have permission to read the contents of directory folder name. Do you want to replace the directory permissions with permissions granting you Full Control?

All permissions will be replaced if you press Yes.
Note folder name is the name of the folder that you want to take ownership of.
6. Click OK, and then reapply the permissions and security settings that you want for the folder and its contents.

Back to the top

How to take ownership of a file
Note You must be logged on to the computer with an account that has administrative credentials.

To take ownership of a file, follow these steps: 1. Right-click the file that you want to take ownership of, and then click Properties.
2. Click the Security tab, and then click OK on the Security message (if one appears).
3. Click Advanced, and then click the Owner tab.
4. In the Name list, click Administrator, or click the Administrators group, and then click OK.

The administrator or the Administrators group now owns the file. To change the permissions on the files and folders under this folder, go to step 5.
5. Click Add.
6. In the Enter the object names to select (examples) list, type the user or group account that you want to give access to the file. For example, type Administrator.
7. Click OK.
8. In the Group or user names list, click the account that you want, and then select the check boxes of the permissions that you want to assign that user.
9. When you are finished assigning permissions, click OK.[/i]

However if you had EFS running on the computer forget it as while you can get the Files copied they will remain Encrypted and unless you know the Encryption Key and have it backed up you are in a world of Hurt that isn't going to go away.

Similarly if you where not using Encrypted File System EFS you can do a repair install with a M$ branded Windows XP install Disc by following the directions here

http://support.microsoft.com/kb/315341

Method 1: Start the reinstallation from Windows XP
To reinstall Windows XP by using Windows XP CD, follow these steps: 1. Start your computer.
2. Insert the Windows XP CD in your computer's CD drive or DVD drive.
3. On the Welcome to Windows XP page, click Install Windows XP.
4. On the Welcome to Windows Setup page, click Upgrade (Recommended) in the Installation Type box (if it is not already selected), and then click Next.
5. On the License Agreement page, click I accept this agreement, and then click Next.
6. On the Your Product Key page, type the 25-character product key in the Product key boxes, and then click Next.
7. On the Get Updated Setup Files page, select the option that you want, and then click Next.
8. Follow the instructions that appear on the screen to reinstall Windows XP.
If you successfully completed the reinstallation, congratulations. You are almost done. Please continue to the "After you reinstall Windows XP" section to finish.

If you received an error or if the reinstallation did not finish, try method 2.
Method 2: Repair install of Windows XP by starting your computer from the Windows XP CD
Note If Windows XP was preinstalled on your computer, you may need the installation CD to reinstall. Contact your computer manufacturer to make sure that you have the installation CD for a repair installation.

To reinstall Windows XP by starting your computer from the Windows XP CD, follow these steps: 1. Insert the Windows XP CD into your computer's CD drive or DVD drive, and then restart your computer.
2. When you receive the "Press any key to boot from CD" message on the screen, press a key to start your computer from the Windows XP CD.
3. The following message on the Welcome to Setup screen will appear:
This portion of the Setup program prepares Microsoft Windows XP to run on your computer: To setup Windows XP now, press ENTER. To repair a Windows XP installation by using Recovery Console, press R. To quit Setup without installing Windows XP, press F3.
4. Press ENTER to set up Windows XP.
5. On the Windows XP Licensing Agreement screen, press F8 to agree to the license agreement.
6. Make sure that your current installation of Windows XP is selected in the box, and then press R to repair Windows XP.
7. Follow the instructions that appear on the screen to reinstall Windows XP. After you repair Windows XP, you may have to reactivate your copy of Windows XP. For more information, click the following article number to view the article in the Microsoft Knowledge Base:
310064 (http://support.microsoft.com/kb/310064/) How to troubleshoot Windows XP Setup problems when you upgrade from Windows 98 or Windows Millennium Edition
If you successfully completed the reinstallation, congratulations. You are almost done. Please continue to the "After you reinstall Windows XP" section to finish.

If you received an error or if the reinstallation did not finish, unfortunately, this article did not resolve your problem. For your next steps, you may want to ask someone whom you know for help. Or, you may want to contact Microsoft Support to help you resolve this problem.[/i]

But if you attempt to do a Repair/In place Install and where using EFS this will destroy your Encryption Key and you will never be able to access your Data again.

Have you tried Opening the system in [b]Safe Mode[/b] and performing a Backup from there?

Col

by darkchaos78

I'll try both methods tonight and see if they give way. Thanks for the help, and if anyone else has any other ways to somehow resolve this problem. Even if it's resolved with one of these methods. It's still intresting to read and learn from what else is possible.

This discussion is closed to new replies.