Windows Forum

Ask something
Discussion Locked

errors when booting up

0 helpful
5 replies

by badnewz20

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
when my pc is booting in windows 98 i recieve alot of vnetsup.vxd errors and dont no how to fix it?

5 replies

by dmiles

Networking components are missing or files are corrupt

You will need your operating system disk

Reinstalling the Netwworking software may fix this problem

From the Start menu,choose Settings,Control Panel,then Network,you want to remove current network components
Reboot

Click Start->Settings->Control Panel,double-click Add/Remove Programs icon->select Windows Setup tab,uncheck communications to remove and click OK
Reboot

Now go back to Windows Setup,select dial-up networking,which is under communications,enable with check and click OK

The dial-up networking will re-install

by bcdowning

This is caused by an incorrect set up of network cards or protocols. Go to Start, Run, type regedit, then hit Ctrl F and type in vnetsup.vxd, or whatever other errors come up, usually there is 3 or 4 of them. When one is found delete the entry, and hit Ctrl F and enter again until all are cleared out of the registry. Reboot and install the network card and protocols again.

This discussion is closed to new replies.