General discussion

Locked

espon c62

By kaykayque ·
I have a espon c62 printer. My problem is the printer prints blank pages. I E. The printer goes through the motion of printing the paper is feed through but the end result is a blank sheet of paper. I have replaced both ink cartages, so I have ink. I receive no errors when printing. I have cleaned the printer heads, aligned the head via the program still prints blank sheets of paper. I have had the printer for about four months had now problems when I first connect it up.

This conversation is currently closed to new comments.

4 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Comments

Collapse -

by TheChas In reply to espon c62

Sounds like the heads have plugged up.

If ink has solidified in the print-head nozzles, you can execute the clean cycle forever and not clean the heads.

Since your printer should still be under warranty, I suggest that you contact Epson for repairs.

Caution: Epson (and most printer manufactures) will not replace the print-head under warranty if you used 3rd party ink in the printer.
If you used a refill kit, or non-Epson ink of any type, you need to buy a new print head and have it installed.

Chas

Collapse -

by ibmer99 In reply to espon c62

sometimes the print driver card in the printer fails, it is a small logic card connected to the printhead, pull printer apart and look closely at this card for burnt components. good luck.

Collapse -

by ameliapumo In reply to espon c62

i have had 3 epson printers with same problem. tried solutions as per your answers and alos contacted epson. I work freelance for a charity and they have had sev eral epson printers donatged. Strangely enough, they all have similar peoblems. New cartridges installed, new deivers downloaded, epson sup[port all do not work. My solution is "do not get an epson printer, they are c**p

Collapse -

by txcas46 In reply to espon c62

I had an older Epson than the C62, and it had a similar problem. I bought some denatured alchol and cleaned the print heads with it. It worked for several months after that. If Epson won't help because of bad ink you might try this.

Back to Hardware Forum
4 total posts (Page 1 of 1)  

Related Discussions

Related Forums