General discussion

  • Creator
  • #2305765

    Event Id: 105


    by deven ·

    I receive three events (id: 105) in my webserver every few hours.

    The events generated is like this :

    Event Type: Error
    Event Source: W3SVC
    Event Category: None
    Event ID: 105
    Date: 5/6/2003
    Time: 12:02:34 PM
    User: N/A
    Computer: WEBSERVER
    The server was unable to register the administration tool discovery information. The administration tool may not be able to see this server. The data is the error code.
    For additional information specific to this message please visit the Microsoft Online Support site located at:
    0000: c6 04 00 00 ?…

    and same events for FTP and SMTP also.

    I have IIS 5.0 running on this server and role is webserver. It is a stand alone machine with one adapter. As well I am using only TCP/IP on this machine(not netbios).

    I tried searching on microsoft, but it says if cable is unplugged from the adapter you get this error. I have only one adapter( with 5 IP’s) and it is working fine.

    What is wrong??

    As well one more question: I get one more event (id:11) daily on this server

    Event Type: Warning
    Event Source: w32time
    Event Category: None
    Event ID: 11
    Date: 5/5/2003
    Time: 12:47:35 PM
    User: N/A
    Computer: WEBSERVER
    The NTP server didn’t respond
    0000: 46 27 00 00 F’..

    As this is a stand alone machine (and co-located to ISP) I cant assign domain controller as a time server. how can I resolve this issue by giving any other time-server.

    Thanks in advance.


All Comments

  • Author
    • #3521246

      Event Id: 105

      by hberkhoff ·

      In reply to Event Id: 105

      For event id 105, take a look at the following url. Basicly what they say is add netbios support.

      For event id 11, you could use the following workaround :

      If you don’t need a synchronisation with an external server,you can make two changes at HKLM\System\CurrentControlSet\Services\W32Time\Parameters:

      new value “ReliableTimeSource, REG_SZ,1” and
      alter value in “Type, REG_SZ, NoSync”

      and the warning disappears in the event log. This is a workaround.

      • #3521245

        Event Id: 105

        by hberkhoff ·

        In reply to Event Id: 105

        Regarding event id 105:The solution mentioned is for NT4, but you could try it anyway.

    • #3358182

      Event Id: 105

      by blackdiamond ·

      In reply to Event Id: 105


      As a test can you install NetBios to see if the error goes away? You can always remove it if it does not remove the event log entry.

      For your time question here is what we used to setup out time server.


Viewing 1 reply thread