General discussion

Locked

Event ID 1053

By rfh4n ·
Event ID 1059 DHCP service failed to see a directory server for authorization.

This conversation is currently closed to new comments.

4 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Comments

Collapse -

by j.lupo In reply to Event ID 1053

My understanding is that your AD is probably not kosher.

Run DCDiag on your DC's and look for failures. I'm guessing DNS issues. However, if you want to provide more information about the issue you are experiencing that would help.

Collapse -

by ctrservices In reply to Event ID 1053

See if this helps http://www.eventid.net/display.asp?eventid=1059&eventno=3795&source=DhcpServer&phase=1

Collapse -

by omairziaee In reply to Event ID 1053

Go to services of the DHCP server
Go to DHCP server service
check the start up type , if the start type
is manual then you can get this error . Make sure it should be automatic

Collapse -

by shankargbs In reply to Event ID 1053

Event ID 1058 is Group Policy related issue. Normally, there are two symptoms: "network path not found" and "access denied". The fixing may be different depending on the issue. To troubleshoot it, try the following suggestions first. If it doesn?t work, call Microsoft for the hotfix.

Netlogon and DFS services are started on both domain controllers and clients.
Domain controllers have the read and apply rights to the Domain Controllers Policy.
NTFS file system permissions and share permissions are set correctly on the Sysvol share.
DNS entries are correct for the domain controllers.
Make sure there are no FRS issues if you have more than one DC.
Not firewall/NAT blocks the traffic between the DC and clients.
The following Case Studies may help too.

Case 1: The client has a Windows 2003 server running Exchange 2003 as Front-End server in the different subnet connect to the DC through a Cisco router. The router blocks most ports except 25 and 110.
Case 2: The client received this error every one hour after disabled TCP/IP NetBios help service.
Case 3: One of Windows has the same issue because the Microsoft Distributed File System (DFS) client is disabled
Case 4: The client received this error every 5 minutes in event log along with error 1059 after upgraded from Windows 2000 to Windows 2003. To solve this issue, set the following attributes in the Default Domain Controller Policy:
1. Network Access: Let Everyone permissions apply to anonymous users = "Enabled".
2. Network Access: Shares that can be accessed anonymously -> Add SYSVOL to the list.
Case 5: The client got this Event error after renamed the DC. To fix the problem, run DCGPOFIX on the DC followed by a reboot.
Case 6: the client has thss issue after they setup ISA prevent LDAP requests from reaching services on the domain server.
Case 7: The client was running multihomed computer in the DC. There is a name resolution issue in the DC. Refer to Name resolution on DC

Back to Networks Forum
4 total posts (Page 1 of 1)  

Related Discussions

Related Forums