Extremly slow system after instalation

By rp.uh ·
I've just assembled pc system and after Installation of Vista whole system is extremely slow- takes 40 minutes to restart and 10 minutes to perform each click.
I assume that the reason could be in drivers- although it?s quite difficult to do anything with it. I?ve successfully installed the bios live update software but cannot connect to internet so far so cannot update bios either.
Also the installation didn?t let me make the partitions so whole disk is just one volume C.
Any tips welcome!
Thank you

This conversation is currently closed to new comments.

Thread display: Collapse - | Expand +

All Answers

Collapse -


by rp.uh In reply to Extremly slow system afte ...

... and few more info:
I've relised that the pc clock is much slower as well (delaying at 10 hours a day).
Motherboard is MSI RC410M-L,
PCU Intel Celeron D 2.8GHz,
Windows Vista Ultimate 64Hz

Collapse -

clock speed

by XnavyDK In reply to update

check your power supply is adequate. check your clock speed for the cpu and ram.
this "quote" is from your MB manufacture website
"Due to the High Performance Memory design, motherboards or system configurations may or may not operate smoothly at the JEDEC (Joint Electron Device Engineering Council) standard settings (BIOS Default on the motherboard) such as DDR voltage, memory speeds and memory timing. Please confirm and adjust your memory setting in the BIOS accordingly for better system stability.
Example: Kingston HyperX DDR500 PC4000 operates at 2.65V, 3-4-4-8, CL=3.
For more information about specification of high performance memory modules, please check with your Memory Manufactures for more details"

so if your using default settings review them

Related Discussions

Related Forums