Foxconn Bios Flash error

By karibarite ·
I eventually got the Bios in the Foxconn motherboard to flash but system rebooted just before it was complete from what I saw, no power failure etc.
Now machi9ne shows correct BIOS number but gets to "Updating EscD" or "Loading DMI" and then stops.
Foxconn have said I can reflash the BIOS if I can get the machine to boot from a Disk.
Any ideas as cannot get that far. Is there any way to stop the "Updating ESCD" and get straight to a bootable disk to reflash the BIOS.?
Help ... just got this motherboard and do not want to throw it away so soon

This conversation is currently closed to new comments.

1 total post (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Answers

Collapse -


by Jaqui In reply to Foxconn Bios Flash error

reset the bios by switching the pin for 30 seconds.
in the manual for the board it will identify the right pin, it's different for each model of board.

Back to Windows Forum
1 total post (Page 1 of 1)  

Related Discussions

Related Forums