General discussion

Locked

Hardware problems

By bulo_mei ·
No beep sound still. I have replaced the SMPS and the RAM also but still there is no sign of booting. I am using a 845 GL Gigabyte mother board. The motherboard still receives current and when i turn on, the cpu fan runs too but the normal post beep sound doesnt appear and no other beep sonuds appear. There is no display in the monitor even though the monitor is workin fine.

This conversation is currently closed to new comments.

3 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Comments

Collapse -

by stress junkie In reply to Hardware problems

I had a Gigabyte motherboard a while back. I never got it to work. I finally just bought an Epox. I will never buy another Gibabyte product.

Collapse -

by slau70 In reply to Hardware problems

i have same problem too.but Try to reset the bios using the bios reset jumper form the motherboard.if don't workind try the same after you unplug and plug the video card and other card or ram stick you have.Try too a big power source like 400w if yours is not storng one.Reviev the bios seting.

Collapse -

by goyal_253 In reply to Hardware problems

This is only the prboblem with the CMOS battery.You just replace the CMOS battry and your problem with be surly shortout.
rgds,
goyal

Back to Hardware Forum
3 total posts (Page 1 of 1)  

Related Discussions

Related Forums