Question Locked

Have Vista want XP pro 64on 2nd HD

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Ok..here is the situation. I have a PC that shipped w/VISTA Home Premium. I have a second hard drive where I wish to install XP Pro 64 edition. The new drive has been formatted and should be ready for the new OS right? Nope..not the case here. I disconnect the power and cable to the VISTA drive, hook up the new drive boot from the Pro CD and the system tells me there is no hard drive detected!! Went into the BIOS and found that indeed it was detected. What am I doing wrong? Is it a SATA driver issue? If so how do you setup new drivers when you have no floppy attached? I want to dual boot and know you can do it but have I bitten off more than I can chew here? Help me..PLEASE!!

2 replies

by barrybgb

I use a program called EasyBCD which works great for dual booting with Vista. If you have the XP Pro64 CD, that is all you should need. Some motherboards have different requirements as to where to put the Drive.Check the manual. If you have the new drive as the first SATA drive and the Bios set to boot from the CD, then it should find the drive and as if you want to partition and format it. I am assuming you are using SATA drives. If you are using IDE then you have to set the jumper on the new drive to master and make it the only drive in the system. Once it is installed as master, boot from the XP Pro CD and it should find the drive.
Once you get XP on the new drive then you can install the EasyBCD program and the Vista drive. You can find the program online and it has all the help files you need to get you going.

This discussion is closed to new replies.