Aside from back up and restore, there are 2 methods that you might need to combine.
The chance of success depends a lot on how similar the 2 motherboards are. Going from AMD to Intel is very difficult. Even different manufactures of chip-sets are problematic.
First, back up ALL critical files and settings. This allows you to recover if something goes wrong.
Download and extract the files for the latest drivers for the new hardware setup. Use an easy to find folder, with a sub-folder for each device.
Next, just before shutting down the old setup for the upgrade, open up device manager.
Remove EVERY device that will be different with the new setup.
You will likely end up removing all devices as plug-in cards will need to be removed in order to remove the motherboard resources.
Shut down and power off the system.
Change the hardware.
Boot up. If all goes well, you can point the new hardware wizard to the extracted driver files.
If you have major problems, the next step is to attempt to perform an "In-Place-Upgrade". This is nothing more than installing XP over itself as an upgrade rather than a new installation.
Keep in mind that with XP as compared to Windows 98 or Me, you do NOT have to format the hard drive to perform a clean installation.
When you install XP on a system that already has XP installed, if you choose the option to install XP in the C:\Windows folder, it will erase all of the system files and start over fresh. All of your files will be intact.
However, any new installation of XP leaves all of your installed programs orphaned. You will need to reinstall them so that XP knows they are there.
Chas