Discussion Locked

Helpdesk Remote Access Software.

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I am looking to start a remote help desk for my clients [As in Customers not Network] but have problems in locating the required software. I need to access Windows systems from 98 to XP and be able to take full control of the system to allow Virus removal, registry editing, program installation etc. etc. I don't wish to spend large ammounts on licences at this time.
Any ideas on what is available and good to use.
Regards
Dave.

7 replies

by jdgretz

Ultra VNc is sort of like pcAnywhere, but it's free. The current version is 1.0.1 and is available from http://ultravnc.sourceforge.net/ .

You can drive the keyboard and mouse as well as do file transfers. You will need to know the public IP Address of the machine in order to access it. If your client's machines are behind a router/firewall that does address translation, then you have a couple of options; 1)remote to a server or something that has a static IP address and then have it go to the offending machine, or 2) if the client has a small number of machines (say less than 10) you can specify a port for each machine in the firewal; or 3) use one of UltraVNc's advanced capabilities to complete the connection. All this is well documented on their website.

jdg

by smanches

Just an FYI, you can also use the computer name if you know what it is when on the same network - we do it all the time for over 500+ pc's.
We use gotoassist for the off-site pc's and have the same capabilities (over 70+ locations). We are a small 4 person ops team for the agency

by bart

Logmein has a free version (pro too is less that half the cost of gotomypc). I register a clients email and a password, select free service(s)... and add systems to the list. It does require me to load the software on each system behind a fire wall (1 minute). It allows admin at each station to disable the service running for added security, when not in use,also you MUST login to each system. This provides, I believe, several layers of protection. You must login to logmein, have the service enable on the desktop, AND know the admin username and pw.

Also I have run VNC server on client systems and logged into JUST ONE SYSTEM and used VNC through the internal network... connecting to every system as need. That way there is NO external IP use (except the router) for breakin's

This discussion is closed to new replies.