Question

Locked

HOW CAN I TROUBLESHOOT/FIX A STOP SCREEN ERROR

By kenoly ·
HI THERE,
IT IS LOVELY TO MEET IMPORTANT PEOPLE AND ASK THEM ONE OR TWO QUESTIONS THAT ARE HARD. I'VE A HP PAVILLION DV2000 NOTEBOOK PC WHICH HAS DEVELOPED A STOP SCREEN ERROR AFTER THAT I REINSTALLED A WINDOWS VISTA BASIC AND ACTIVATED IT ONLINE. THIS PROBLEM HAS BEEN FREQUENTLY OCCURING WHENEVER I ACTIVATE THE OS
(WINDOWS VISTA HOME BASIC)
PLS, CAN SOMEBODY HELP ME TO FIX THIS...
THE ERROR CODE IS: 0X0000012A

This conversation is currently closed to new comments.

6 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Answers

Collapse -

These may help

by OH Smeg In reply to HOW CAN I TROUBLESHOOT/FI ...

http://support.microsoft.com/kb/958233/en-us

This relates to Blue Screen Stop Errors

Or this page on HP's Web Site should cover everything you are currently facing.

http://h10025.www1.hp.com/ewfrf/wc/documentSubCategory?rule=22527&lc=en&dlc=en&cc=us&lang=en&product=1817074

But just one question here after you reinstalled the OS did you open the Device Manager and make sure that all of the required Drivers where installed?

If you didn't that may be the cause of your problem.

Col

Collapse -

You can also try this

by Jacky Howe In reply to HOW CAN I TROUBLESHOOT/FI ...

How to automatically repair Windows Vista using Startup Repair


http://www.bleepingcomputer.com/tutorials/tutorial148.html

Make sure that you select the correct language.

Collapse -

To get to the bottom of the error message

by Jacky Howe In reply to You can also try this

Press the WinKey + Pause
Click Advanced and under Startup and Recovery select Settings.
Uncheck Automatically restart.
Click on the dropdown arrow under Write debugging information.
Select Small memory dump (64 KB) and the output is %SystemRoot%\Minidump.
Restart the PC normally as this will allow the System to Blue Screen and create the Minidump.

Minidump Files can be found here. C:\WINDOWS\Minidump\Mini122707-02.dmp

How to read the small memory dump files that Windows creates for debugging

http://support.microsoft.com/kb/315263

To download and install the Windows debugging tools, visit the following Microsoft Web site:

http://www.microsoft.com/whdc/devtools/debugging/default.mspx

Instructions on using Windbg.

Open Windbg and select file, Symbol file path and browse to the Symbol folder that you have downloaded and installed Symbols to, select OK.
Close the workpage and save the Workspace information. This should lock in the Symbol path.
Open Windbg and select file and select Open Crash Dump then navigate to the minidump, highlight it and select Open.
There are two ways to use !analyze -v the easiest is to click on !analyze -v under Bugcheck Analysis.
When you have ran the initial dump if you look to the bottom of the screen you will see kd> to the right of that type in !analyze -v and press the Enter key.
Ctrl + a will let you copy the information and paste it into notepad.

Look to the bottom of the page for information like this. This was fixed by updating the Graphics Drivers.
FAULTING_THREA 864f6a98

DEFAULT_BUCKET_I GRAPHICS_DRIVER_FAULT

CUSTOMER_CRASH_COUNT: 1

BUGCHECK_STR: 0xEA

PROCESS_NAME: logon.scr

LAST_CONTROL_TRANSFER: from 00000000 to bfef0fea

STACK_TEXT:
f6434e6c 00000000 00000000 00000000 00000000 sgiul50!DrvBitBlt+0x585


STACK_COMMAN .thread 0xffffffff864f6a98 ; kb

FOLLOWUP_IP:
sgiul50!DrvBitBlt+585
bfef0fea 75f9 jne sgiul50!DrvBitBlt+0x580 (bfef0fe5)

SYMBOL_STACK_INDEX: 0

SYMBOL_NAME: sgiul50!DrvBitBlt+585

FOLLOWUP_NAME: MachineOwner

MODULE_NAME: sgiul50

IMAGE_NAME: sgiul50.dll

DEBUG_FLR_IMAGE_TIMESTAMP: 3b7dfec7

FAILURE_BUCKET_I 0xEA_IMAGE_sgiul50.dll_DATE_2001_08_18

BUCKET_I 0xEA_IMAGE_sgiul50.dll_DATE_2001_08_18

Collapse -

Solution to STOP Error

by VikasAjitMedhekar In reply to HOW CAN I TROUBLESHOOT/FI ...

Using RegInOut System Utilities, run a full registry scan. Fix the errors found in it.

Make sure that the disk is not overloaded with unnecessary files and stuff. Using Disk Cleaner, delete the temporary files stored in it.

1. Open My Computer.
2. Right click a drive and select "Properties".
3. Click "General" tab.
4. Click "Disk CleanUp" button.
5. Follow the instructions that appear on your screen.

Collapse -

Reponse To Answer

by Mehul Bhai In reply to Solution to STOP Error

Zombie Alert!!!

Collapse -

Zombie Alert!!!

by Mehul Bhai In reply to HOW CAN I TROUBLESHOOT/FI ...

Zombie Alert!!!

Back to Windows Forum
6 total posts (Page 1 of 1)  

Related Forums