Question Locked

How do I install XP and Vista on different hard drives and dual boot?

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I am currently thinking about building a new computer and I would like to use a new SATA hard drive with Vista installed and also have my IDE hard drive with XP installed from my old computer hooked up so that I can dual boot. How would I go about this? I understand I would have to set up one of them as the priority in the bios, is that how I would switch between operating systems? Would I be able to access data on my XP hard drive while I was in Vista?

4 replies

by dmiles

Generally speaking
Setup should have the IDE as the boot drive

The setup will be shown in the Boot Manager to which you can set the timing or which system to boot first

Accessing files from Vista while being in XP would have to to be done by accessing My Computer and opening the second drive
HTH

by oh smeg

Hardware and have it work without some form of reinstall being applied here.

You should also have the Master Boot Drive as the IDE Drive as that has to be in place to allow the computer to continue to boot after you have the Dual Boot Option setup. If you install Vista onto the SATA drive and then fit a IDE Drive the Hardware will treat the IDE Drive as the default drive and not allow the Vista Install to boot.

As for accessing your data on the XP Drive while using Vista this may not be quite as easy as you expect particularly if you have protected the drive in any manner at the very least you will need to take ownership of the Data Files and maybe you will need to do more depending on what security you have in place. Also you can not perform an In Place install of XP if you have Windows EFS running as the encryption Key will be destroyed and all your data will be garbage as a result. So if you where using Windows Encrypted File System you need to backup all your data unencrypted before proceeding.

As to how you change the OS this can only be done when you boot and you should see a screen that gives you the option of choosing either XP or Vista to boot into when you first start the computer running.

Col

by danielarbib

This will be of little value to you, but I have tried to have a dual boot system and found that whichever was put on first, there were always major problems. My solution, for what it's worth, was to build into my own computer using a spare slot a caddy and slider to enable the facility to plug-in physically independent hard drives. This works but data transfer (not actuualy tried) from one drive to another probably requires a USB connected external memory device.

I have XPpro/SP2/IE7 on one drive and Vista Ultimate 64 bit on another (this I only use experimentally as there is, in general, a paucity of 64 bit drivers)

This discussion is closed to new replies.