Question Locked

How do I install XP Pro on an IBM ThinkCentre without a working CD Drive?

0 helpful
14 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
So here's the deal. My sister bought a computer from the flea market. It has a floppy drive, a CD-RW/DVD drive that doesn't work, and no operating system. I am trying to install Windows XP Pro onto this computer. Does anyone have any suggestions? I have tried using the 6 floppy disk that I created from the Microsoft site. However, after inserting the final floppy, it asks to insert the Windows XP Pro cd into the drive. When I insert the CD and hit enter (as instructed) nothing happens. I don't know what else to do.

14 replies

by mmoorewright

I purchased a copy from Staples. I have a product key and everything. This was before I knew the CD drive didn't work and won't read the cd once it's in the drive.

by mmoorewright

I do have an external hard drive. It's a Seagate with 320GB of space. But I don't have an external CD/DVD drive. Is there a way I can boot from the external drive?

by seanferd

You may want to get a CD or DVD drive or burner, as you will probably want it sooner or later anyway. A real cheap CD drive is like 20 bucks.

Your other option here is to use a different computer to copy the entire XP CD to a folder on the external drive. You can do the 6 floppy deal and point the "insert CD" instruction to the folder on the hard drive.
The system will need to be able to access the external drive without an OS loaded, and I don't know if it can do that. You may want to install the drive inside the computer if it can't.

by mmoorewright

a new internal CD/DVD drive and installed it in the computer. Still nothing. I'm having the same issue. I'm wondering if it's something else. I don't think it's the hard drive because I can boot in DOS. Do you have any other suggestions or options I may try?

by nimmo

If you have a floppy drive on the thinkcentre and have another PC you could install some multicast software such as norton ghost on your PC and boot the thinkcentre off the ghost floppy disk, join to the multicast session and pull down the image that way.

by mmoorewright

able to read the contents, from DOS, on the Windows XP cd that I put in the drive. When I type the command "dir r:\i386" (without quotes of course) from the A prompt it lists all the files that are located under the I386 folder on the CD. How do I get DOS to run the "winnt.exe" file from the CD without being able to change my directory to the CD drive?

by seanferd

So the boot floppies aren't giving you access to the optical drive?

Does the BIOS indicate whether or not the machine will boot from CD?

If not, I am wondering if you might be able to just use a DOS or Win98 boot floppy to access that drive, or just boot off the HD, if you get cd drivers loaded.

A generic Win98 boot CD might work, it will load one of several drivers if it finds an appropriate one.

The other choice for a boot floppy like this is to build your own, if there is a specific DOS driver available for your optical drive. You can just add that driver to the boot disk, and change the config.sys and autoexec.bat to load the driver and mscdex with the appropriate parameters.

by computercookie

if you can boot from the floppy disk, this will install drivers for the new optical drive!

It should now work, change directory and setup > enter.

If it doesn't work run fdisk,format, chkdsk and try setup again.

by mmoorewright

a Windows 98 boot disk. I was able to do a fdisk, format, and scandisk on my C drive. Also when I start the computer, it tells me that my CD drive is drive R. However, when I try to do a change directory to that drive nothing happens. For a brief second I'll see the R drive, but then DOS automatically brings it back to the A drive. The same thing happens when I try to change directory to the C drive. Did I do something wrong?

by mmoorewright

but I placed my last post in the wrong place. Please see post with title "Now I am". I just want to thank all of you for helping me out.

by mmoorewright

I was able to switch to my CD drive and copy all of the files from the I386 folder onto my HDD. Then I was able to run "winnt.exe" from the HDD. After the computer went through the XP setup, it instructed me to restart the computer. After restarting, the computer just comes up with a black screen with a blinking cursor on the screen. From my understanding, the Windows XP GUI is suppose to start to finalize the installation and it's not coming up. What next...any suggestions?

This discussion is closed to new replies.