Discussion Locked

how to change resloution of screen

0 helpful
8 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Yesterday when i turned on the computer, a little window popped up and said it found new hardware and was installing the driver. ever since then I have been unable to change the screen resolution by using the control panel, display, settings method. the slider for the pixels just won't move. how can i get it to move again so i can shrink the window so i can see it all again.
thanks

8 replies

by alpha-male

Sounds to me like your system "mis-identified" your video card. I would boot into safe mode, remove the video drivers then restart and re-install the videocard. Use the latest drivers from the company's website if possible. This should fix you rightup....

Good Luck!

by vinette

thanks,
did this and no change in resoulution.
appreciate the time and answer.
vi

by thechas

Had you performed a Windows update recently?
Or, installed a new program or update?

I have seen Windows update send wrong device drivers.
And, I have seen software installations blow away hard ware drivers.

I recommend that you start by installing the drivers for the chipset on the motherboard (or the current drivers for your system from Compaq)
Then, install the latest version of the video driver for your card.

That should take care of things.

Chas

by borginva

Sounds like your video card/monitor settings got corrupted or went bye-bye. Go ito CONTROLPANEL>SYSTEM and look at your hardware profile. See if there are any errors. If you find something that should not be in the DISPLAY ADAPTERS, try removing it.After you do that, or if nothing was there, try reinstalling your video card drivers.
When my driver for my VoodDoo 3 2000 card got corrupted, I did not go to 16 colors, but to 4 with the 600x800 resolution. Reinstalling the drivers was the way to go.

by vinette

thanks,
nothing i did worked, even using the recovery disc that came with the computer. thanks for trying
vi

This discussion is closed to new replies.