Discussion Locked

how to check for IRQ conflict in NT 4

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
How do you check for a sound Card IRQ or resource conflict in windows NT 4.0 ?

5 replies

by don christner

Select Start|Run and then type Winmsd and hit enter. This starts NT diagnostics, select the resources tab from the top of the screen and make sure that the IRQ button is selected at the bottom of the screen. It now displays all of the used interrupts.

Don

by shanghai sam

telnet@ix:

To resolve IRQ conflicts for Sound Cards in NT4:

1. Go to Start/Settings/ControlPanel/Multimedia;
2. Select the "Devices" Tab;
3. Expand the "Audio Devices" option;
4. Either double-click the name of the device installed in your PC, or highlight and then left-click "Properties;"
5. Left-click the "Settings" button;
6. Go to the IRQ field and change the value as needed, by selecting an available IRX.

For a listing of available IRQs:
1. Go to Start/Run
2. Type winmsd.exe in the "Open:" field; left-click "Okay"
3. Left-click the Resources tab to view which IRQs are in use

This discussion is closed to new replies.