How to configure MRTG for monitoring CISCO's CPU and Memory utilization?

Question

Creator

Topic
August 6, 2008 at 8:02 am #2153945

How to configure MRTG for monitoring CISCO’s CPU and Memory utilization?

Locked

by pamengual · about 14 years, 5 months ago

I have running MRTG and i`m monitoring lots of interfaces on CISCO routers and switches, but i don’t know how to monitor CPU’s and memory utilization.
thanks

This conversation is currently closed to new comments.
Creator

Topic

All Answers

Author

Replies
- August 6, 2008 at 8:02 am #2921342
  
  Clarifications
  
  by pamengual · about 14 years, 5 months ago
  
  In reply to How to configure MRTG for monitoring CISCO’s CPU and Memory utilization?
  
  Clarifications
- August 6, 2008 at 8:34 am #2921308
  
  I actually used to know that by memory
  
  by Anonymous · about 14 years, 5 months ago
  
  In reply to How to configure MRTG for monitoring CISCO’s CPU and Memory utilization?
  
  But all you have to do is “walk the SNMP tree” to find out the correct MIB OID’s. From the walk, you can narrow down the CPU fairly easily enough. SNMPWALK is an old *ix command/program that you can run from a *ix box or even Windows nowadays, but you will probably have to download it.
  
  Google mrtg snmpwalk and you’ll get all kinds of answers.
Author

Replies

Viewing 1 reply thread

Start or Search

Start New Discussion

This policy describes guidelines your organization can follow to track, process and decommission IT equipment. From the policy: SUMMARY An organization’s IT hardware inventory constitutes a significant capital investment in order to perform company operations. Because hardware represents a critical asset and often holds organizational data, it is important for the company to track each ...

Whether an infection is the result of a disgruntled employee, hardware vulnerability, software-based threat, social engineering penetration, robotic attack or human error, all organizations must be prepared to immediately respond effectively to such an issue if the corresponding damage is to be minimized. Because even the best protected networks become infected, all organizations must have ...

Every operating system should be appropriately secured, especially end user workstations which often contain or permit access to company data and upon which most employee job duties are based. To get the maximum security protection out of your Windows 10 deployments follow this checklist from TechRepublic Premium. Also included in this checklist: Security solutions Product ...

Hardware

Question

How to configure MRTG for monitoring CISCO’s CPU and Memory utilization?

All Answers

Clarifications

I actually used to know that by memory

Hardware inventory policy

Malware response checklist

Checklist: Securing Windows 10 systems

Cloud data storage policy