Question Locked

How to restore Vista when system goes bad!

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Dear friends; I successfully installed vista and appls onto a new hard drive. Now I have created two images, one with Ghost and one with Acronis image, I then cause some damage to the files on the disk and try to do a complete recover from both images independently and have not been successful, I get a "Missing NTLDR Message", which means it will not boot properly. Can anyone suggest an appropriate way to recover Vista should this be a real disaster for me?

4 replies

by Former member

NTLDR or NTDETECT.COM Not Found
If you get an error that NTLDR is not found during bootup,
If you have FAT32 partitions, it is much simpler than with NTFS.
Just boot with a Win98 floppy and copy the NTLDR or NTDETECT.COM files
from the i386 directory to the root of the C:\ drive.
For NTFS:

1.Insert and boot from your WindowsXP CD.

2.At the first R=Repair option, press the R key

3.Press the number that corresponds to the correct location for the installation of Windows you want to repair.
Typically this will be #1

4.Enter in the administrator password when requested

5.Enter in the following commands (X: is replaced by the actual drive letter that is assigned to the CD ROM drive.
COPY X:\i386\NTLDR C\:
COPY X:\i386\NTDETECT.COM C:\

6.Take out the CD ROM and type exit

Please post back if you have any more problems or questions.

This discussion is closed to new replies.