3 replies
by kfmerrill Accepted solution
by Former member Accepted solution
Hopefully this will bring the webcam and sound back to normal, but then Windows sometimes does not play down the normal route. Give this a try.
Please post back if you have any more problems or questions.
by oh smeg Accepted solution
The only things I can suggest is to look at the amount of resources being used by both the computer and the Interface to the Web Cam.
Normally changes to Web Cam's function can be traced to either the Connection to the computer having a problem of transferring a lot of Data so if it is on a USB Port plug the Web Cam directly into the USB Socket on the M'Board not a USB Extension Lead, USB Hub, the USB Sockets on the front of the computer or anything else just plug it into the M'Board. Do not transfer data to any external storage device while you are recording from the Web Cam and do not do any CPU Intensive tasks while you are recording either.
Run Defrag regularly as if the HDD is heavily fragmented it will slow down performance and if the computer is writing files all over the HDD this can cause problems. Just remember that every minute of Streamed Video = 1 GIG of Data stored on the HDD or there abouts so the traffic is high to begin with.
If that doesn't work and reinstalling the Software doesn't help and you have a lot of Free Space on the HDD I would suggest reinstalling Windows again without too many things running from Startup. The harder you work the computer the less resources will be available to Stream Video with so keep the system as lean and clean as possible.
Col
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending