Question Locked

HP PSC has taken over my USB ports!

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Looking for help if possible...I have an HP PSC 2350 connected to my [Windows XP] system via USB and it works..or worked ...perfectly until last week...I bought an external HD 10GB "Store & Save" device as a backup for my PC. Basically I wanted to use it to transfer files to keep and work with but that I only need to access every so often.
Anyway..I plugged Store & Save into an available USB port and it worked. Then I SAFELY turned it off and unplugged it. That afternoon I had to print a file and since then I can no longer use the Store & Save or indeed even a Flash stick.
When I plug them in I hear the "new hardware recognized" clang but when I open Explorer I cannot find or read the drive [supposed to be G: drive] Only the HP PSC is there.
And when I open Control Panel all I can find is the USB hub controller which now calls itself a HP PSC 2355 device. [??? !!!]
I've tried unplugging, uninstalling, reconnecting. The only thing I get is a message telling me I may now disconnect my printer safely even when it is a Flsh stick or external drive that is connected.
How do I get my PC to recognize a flash stick as a flash stick, G;drive as G; drive and NOT an HP printer scanner?

I've also tried switching USB port connnections..and get the same result. It's like HP took over all my USB controlled devices except my mouse.

Any help would be GREATLY appreciated!
Thank You

6 replies

by Former member

Control panel > system > device manager. Look for your drive(s) in here and see if any of them have a small yellow or red tag next to them. If they have then right click on it and select "update drivers > browse computer for drivers" and then click on a drive that relates to your drive that you have connected.
You might need to reboot your system after this.

Please post back if you have anymore problems or questions.

by shai.shahar

Dear Peconet,

That is something I already tried..there are no yellow flags because the only drives listed are C,D,E,F, and H and when I right click I am informed that the selected drive is working properly.
As I said..the Store & Save..or any external USB connected hardware is supposed to register as G drive. It did up until a month ago..but now even when the S&S or Flash stick is inserted it either doesn't show up..or it is recognized as a HP USB device{PSC 2350}.

by computercookie

Control Panel > Administrative Tools > Computer Management > Disk Management and what do you have?

by Former member

Go into:
Control Panel > Administrative Tools > Computer Management > Disk Management and select drive "F" and right click on it and select "change drive letter" change the drive letter to "J", close disk management and then try your usb drive again to see if it comes up as G drive.

Please post back if you have any more problems or questions.

by shai.shahar

Thank You Thank You Thank You!
It worked on the very 1st try.
;-)

I would never have figured that out by myself or with any google search. Bless you!

-Sincerely

This discussion is closed to new replies.