General discussion

Locked

HPDeskjet 2500c

By mmaisva ·
I recently replaced the Print heads for a HP Deskjet 2500c, the problem is after i replaced everything the printer keeps flashing saying, the print head access cover is open. where can i adjust so that i clear the error.
All the covers are closed but the message keeps flashing.

This conversation is currently closed to new comments.

1 total post (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Comments

Collapse -

HPDeskjet 2500c

by Alpha-Male In reply to HPDeskjet 2500c

I would remove, check and re-install the print heads (all). Make sure they are all clicked and locked into place securely (I've heard the 2500 is pretty touchy about this - make sure they are well seated).

Here is HP's article on switching the heads and troubleshooting (in case you haven't already seen it).

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=bpd06188&locale=en_US&taskId=8413&taskName=troubleshoot+a+problem&prodSeriesId=25516&prodTypeId=18972&prodSeriesName=hp+2500c+printer&docId=4428

(delete any spaces in the URL).

If the issue persists and you are certain the heads are correct, it could be a problem in the print head carriage assembly. I would contact HP for assistance.

Back to Hardware Forum
1 total post (Page 1 of 1)  

Related Discussions

Related Forums