General discussion


I am facing some problem with my OS or Hardware ( Laptop)

By Asim Siddiquie ·
I am Facing some Intermitant problems,It suddenly stop or disable some keys while working like CTRL+ALT+dEL,win+L,disable task maneger,Usb port disable (not working) and when i'll try to restart and log off the machine it does not
take the command and remain in the same state,after forefully shutdown with
power Button of the machine and then restart the machine it become normal
and working fine.
I have Run dell daignostic Utillity there was no hardware issue on the
machine regarding this problem.

Dont want to Repair or rebuild Windows :-)

This conversation is currently closed to new comments.

Thread display: Collapse - | Expand +

All Comments

Collapse -

Repost as 'Q&A'

by HAL 9000 Moderator In reply to I am facing some problem ...

Try reposting this in the 'Q&A' forum. The 'Discussion' forum is for matters of general discussion, not specific problems in search of a solution. The 'Water Cooler' is for non-technical discussions. You can submit a question to 'Q&A' here:;content

There are TR members who specifically seek out problems in need of a solution. Although there is some overlap between the forums, you'll find more of those members in 'Q&A' than in 'Discussions' or 'Water Cooler'.

Be sure to use the voting buttons to provide your feedback. Voting a '+' does not necessarily mean that a given response contained the complete solution to your problem, but that it served to guide you toward it. This is intended to serve as an aid to those who may in the future have a problem similar to yours. If they have a ready source of reference available, perhaps won't need to repeat questions previously asked and answered. If a post did contain the solution to your problem, you can also close the question by marking the helpful post as "The Answer". .

Well as you do not want to rebuild/reinstall Windows you can try doing some real diagnostics. The Ultimate Boot CD is free and available here

Start with a Memory Test use the Ultimate Boot CD and boot off it then go to Memory and select the highest version of Mem Test and run that.

If there are any errors shown and you have more than 1 Ram Module Fitted remove all but 1 RAM Module and retest. If it passes rerun the test but with the other RAM Module Fitted. If that passes then you have a Timing Issue with the RAM Modules and while both are OK they are not Matched and are causing these issues.

For further help post to the Q&A.


Related Discussions

Related Forums