General discussion

  • Creator
    Topic
  • #2257398

    I need some help identifing

    Locked

    by hal 9000 ·

    A Intel Server Board it’s a dual processor Slot 1 M’Board with a PBA of 703861-209 and a IBN58481611.

    Other than the standard DIM markings and that type of thing there is no other markings on the Board and the PBA number dosn’t appear on Intel’s web Site.

    Does anyone have any idea of the Model Number?

    The Dust Bunnies have got to this system and it’s not currently running and I would like to know a little more about it before I change the dead PS as I don’t want to do any more damage that has already been done.

    I can live with the fact that it may be dead but I don’t want to be the one to kill it off. Currently it has 2 X 550 P3’s on it and an unknown amount of some form of SD RAM as there are no markings on the RAM either.

    But it’s a standard looking Server board with on board IDE, Floppy Controller, Video, USB, LAN, and SCSI in both the 50 & 68 Pin arraignments. The second COM Port is on a Fly Lead and so are the 2 X USB Ports but otherwise it’s a standard Dual Processor Slot 1 M’Board.

    I just need to know what I’m dealing with before I attempt to apply power again after I finally get all the dust and other crap out of the case.

    Col

All Comments

  • Author
    Replies
    • #3215042

      Reply To: I need some help identifing

      by wcp ·

      In reply to I need some help identifing

      Have you tried Aida?

      http://tinyurl.com/htv8v

      • #3214927

        Reply To: I need some help identifing

        by hal 9000 ·

        In reply to Reply To: I need some help identifing

        As I said the unit isn’t currently running I’m not willing to attempt to apply power till I know a bit more about what I’m dealing with.

    • #3215039

      Reply To: I need some help identifing

      by cg it ·

      In reply to I need some help identifing

      well nothing comes up on the Intel site for either of those numbers. ….

    • #3215033

      Reply To: I need some help identifing

      by subashsuppiah ·

      In reply to I need some help identifing

      Try downloading this software on the net, iit’s called cpu-z. It gives you a most answers that you need about the motherboard, RAM and the processor.

      • #3214925

        Reply To: I need some help identifing

        by hal 9000 ·

        In reply to Reply To: I need some help identifing

        As I said the unit isn’t currently running I’m not willing to attempt to apply power till I know a bit more about what I’m dealing with.

    • #3215008

      Reply To: I need some help identifing

      by zombiebot ·

      In reply to I need some help identifing

      Hi,

      I found this http://developer.novell.com/yes/52015.htm
      The PAB matches the number you identified.

      Hope this helps,

      Rob

    • #3214931

      Reply To: I need some help identifing

      by cg it ·

      In reply to I need some help identifing

      Zombiebot gets the prize. thats the board!

    • #3214930

      Reply To: I need some help identifing

      by ontheropes ·

      In reply to I need some help identifing

      Looks like an N440BX

      This came up at Intel using the number 703861
      http://tinyurl.com/o7btm

      This is Intel?s Legacy Server/Motherboard page
      http://tinyurl.com/qunnn

      • #3214928

        Reply To: I need some help identifing

        by ontheropes ·

        In reply to Reply To: I need some help identifing

        To be clear – I entered 703861 in Search at the Legacy Server/Motherboard page to arrive at the N440BX page

      • #3214923

        Reply To: I need some help identifing

        by hal 9000 ·

        In reply to Reply To: I need some help identifing

        Thanks for the link I didn’t think to only enter part of the PBA.

        This one must be a sub model of the one listed here now all I have to do is finish cleaning out the mess inside it before I go any further. Perhaps my high pressure Genni will do the trick 😀

        Honestly this looked like such a nice clean unit till the cover was pulled then it looked as if someone had emptied a Vacuum Cleaner Bag or bags into the insides.

    • #3214922

      Reply To: I need some help identifing

      by hal 9000 ·

      In reply to I need some help identifing

      This question was closed by the author

Viewing 6 reply threads