boy i think i did get the wrong DDR ram, or a least the density part of it high ver low
i presently have DDR pc2100 256 mb and DDR pc2300 512 mb on a my gigabyte GA-7vtxh+ MOBO
but
i pruchase more ram on ebay only to find that the density many be a problem
i think i got the wrong DDR ram for my compter
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, :confused:
i got this info from
http://www.crucial.com
Number of Slots:
Slot 1
Slot 2
Slot 3
Each memory slot can hold DDR PC3200,DDR PC2700,DDR PC4000 with a maximum of 1GB per slot.*
*Not to exceed manufacturer supported memory.Currently installed memory:
256 MB
DDR PC2100
512 MB
DDR PC2300
EMPTY
Each memory slot can hold DDR PC3200,DDR PC2700,DDR PC4000 with a maximum of 1GB per slot.*
*Not to exceed manufacturer supported memory.
To see the memory installed in your computer click the Scan My System button below.
Maximum Memory Capacity: 3072MB
Currently Installed Memory: 768 MB
Available Memory Slots: 1
Number of Banks: 3
Dual Channel Support: No
CPU Manufacturer: AuthenticAMD
CPU Family: AMD Duron(tm) Model 7, Stepping 0
CPU Speed: 1000 MHz
Chipset: VIA Apollo KT266A
Error Detection Support: ECC and non-ECC
Supported DRAM Types: DDR SDRAM only
Module Types Supported: Unbuffered and Registered
Max Unbuffered DDR SDRAM: 3072MB
Max Component Density: 512Mb
184-pin DIMM Banking: 3 (3 banks of 1)
Max Registered DDR SDRAM: 3072MB
Graphics Support: AGP 4X
USB Support: 1.x Compliant
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
i purchase on e bay 1GB PC3200 DDR400 PC 3200 PC2700 DDR 1 GB AMD RAM
http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&ih=020&sspagename=STRK%3AMEWN%3AIT&viewitem=&item=300075453552&rd=1&rd=1
JEDEC Standard 184-pin Dual In-Line Memory Module
100% Backward compatible to PC2700 / PC2100
128×4 DDR Unbuffered 184Pin DIMM
Performance: PC3200
DQ DQ Burst Frequency: 400MHz
Inputs and outputs are SSTL-18 compatible
SDRAM have 4 internal banks for concurrent operation
Differential clock inputs
Data is read or written on both clock edges
Bi-directional data strobe with one clock cycle preamble and one-half clock post-amble
Address and control signals are fully synchronous to positive clock edge
Programmable Operation:
Burst Type: Sequential or Interleave
Burst Length: 4, 8
Operation: Burst Read and Write
Auto Refresh (CBR) and Self Refresh Modes
Automatic and controlled precharge commands
Serial Presence Detect
SDRAMs in FBGA Package
RoHs compliance
SPEED: PC3200 (Backwards Compatible with PC2700, PC2100
Enhanced for AMD Based Systems & Boards
Details
l 184-pin unbuffered DIMM
l Density: HIGH
l Maximum 6.4GB/s bandwidth
l JEDEC standard 1.8 +/-0.1V power supply
l 128×4 component configuration
l CAS Latency 3
l 4 Bank
l Off-chip driver (OCD) impedance adjustment, and on die termination (ODT)
Product Name
1GB DDR400 400MHZ (PC3200) 184 Pin SDRAM MEMORY
Technical Information
Memory Size
1GB DDR 184Pin
Number
1 x 1GB
Memory Speed
400 Mhz
More Information
1024MB x 1
High Density Chip configuration
Non ECC
Non Registered
UnBuffered
CAS LATECY CL3
PCB LAYER :
6 Layer
Non Parity
Physical Characteristics
Form Factor
184-pin DDR
Gold Pin
Green PCB
Warranty
Life Time Manufacturer warranty
——————————————————————————–
System Requirements :
1. Your system / Board must be able to use 1GB DDR modules
2. Not an Intel based or has ASUS board or nVidia Chipset on Board
Compatible with ALL OTHER MAJOR boards and Systems with AMD Processors:
These and more:
Microstar
Gigabyte
Abit
DFI
ECS
PCCHIPS
EPOX
Chaintech
Biostar
IBM
Brand New
Compatible
Brand New Compatible
Designed to specifically work with AMD based Motherboards
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
it all come down to high density and low density,, i should be use low, but i got high, some thing i did not know any thing about on til to nite
