7 replies
by wim
This tells you how -->
by trackhappy
I couldn't get to the article specified above, so maybe you already have an answer.
1. You have to upgrade the PDC first. On whichever machine you want to be the new 2000 AD server, install NT4 as a BDC, and promote it to be the PDC.
2. Then upgrade this machine to 2000 and AD will follow along. Make sure DNS is already on a 2000 server or let the new server install DNS, as AD relies upon it. It is critical that DNS is running correctly, and preferable that it is Windows 2000 DNS.
3. You can then upgrade the BDC's and go Native Mode if you are comfortable.
by jim.kam
It seems that you are intended to upgrade your WinNT to Win2k, it will not be as easy as you can imagine. Here we go,
1. Synchronized between your PDC and your BDC, and then backup the PDC as well as the BDC.
2. Install a new Win2k member serverinto the existing WinNT domain, and install the DNS service.
3. Configure your BDC as an LMRepl export server for logon scripts.
4. Now you can upgrade your PDC to a Win2k member server.
5. On the new Win2k member server, verify you DNS configuration
6. Then, promote the former PDC (Win2k member server) to a Domain Controller as a new domain controller in a root domain.
7. Promote the new Win2k member server with DNS install to become a DC in the same domain. This is to provide redundancyin case any disaster occurs.
8. Upgrade the BDC to Win2k member server and upgrade it to become a DC.
9. Configure all DC to run in native mode.
As you can see it involves a lot of difficult movements, I would recommend you to try this in a test environment before you launch the upgrade. Download a trial copy of VMware workstation 3.2 from www.vmware.com to performing your testing. I have done a lot of testing with this tremendous simulation software, and it helps!
Good luck! 8)
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending