General discussion


improving communication on site

By bhavitparikh2001 ·
Hi folks,
We are running 256kbps Optus shiron services and trialling a Call Direct CDM-790 NextG Box connected to 14dbi Yagi(Vertical). So far the reception is inconsistent works well at night but not during the day when needed the most.
4 Voice lines are provided by an NEC DMR that feeds backinto the PABX at our Melbourne office, a Beam RST-100 provides redundancy via Telstra iridium satellite. Latency can be issue for the voice but is generally quite good, most complaints around slow network access. A juniper WX-20 WAN accelerator is on site but is primarily used for QoS.

Could anyone provide me on how we can improve the current setup or what we should be using instead??

This conversation is currently closed to new comments.

Thread display: Collapse - | Expand +

All Comments

Collapse -

Repost as 'Q&A'

by HAL 9000 Moderator In reply to improving communication o ...

Try reposting this in the 'Q&A' forum. The 'Discussion' forum is for matters of general discussion, not specific problems in search of a solution. The 'Water Cooler' is for non-technical discussions. You can submit a question to 'Q&A' here:;content

There are TR members who specifically seek out problems in need of a solution. Although there is some overlap between the forums, you'll find more of those members in 'Q&A' than in 'Discussions' or 'Water Cooler'.

Be sure to use the voting buttons to provide your feedback. Voting a '+' does not necessarily mean that a given response contained the complete solution to your problem, but that it served to guide you toward it. This is intended to serve as an aid to those who may in the future have a problem similar to yours. If they have a ready source of reference available, perhaps won't need to repeat questions previously asked and answered. If a post did contain the solution to your problem, you can also close the question by marking the helpful post as "The Answer". .

Related Discussions

Related Forums