General discussion


Instaling SCSI SCANNER in NT

By Matt27 ·
I am connecting a Epson GT - 9000 SCSI scanner via a 3181E CE ISA SCSI card on an IBM300GL desktop PC eunning WIN NT 4 SP6. I have gone to control panel but it does not list the scanner or card as a SCSI device. I have reseated the card and also tried another SCSI address on the switches on the scanner. I have tried the card and scanner on a 95 box, and that works all OK.
I have also reloaded the latest scanner device drivers from Epson. Any help appreciated.

This conversation is currently closed to new comments.

Thread display: Collapse - | Expand +

All Comments

Collapse -

Instaling SCSI SCANNER in NT

by Salochin In reply to Instaling SCSI SCANNER in ...

My first port of call would be the BIOS. You said that the card is an ISA one, so you need to allocate an irq and even possibly a memory address range to accomodate the card in the system.

Once done, you need to add the drivers to bind to the card - bear in mind that this is NT and the device WON'T be shown in the control panel as it isn't PNP.

Related Discussions

Related Forums