Discussion Locked

Installing Devices during repair

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

During a repair installation of W2K Professional on a Dell OptiPlex GX1, the installing devices segment is at a stall midway through. The disk
activity light flashes about twice per second, but the process completion bar has not budged after many hours. What is the cause? How can I troubleshoot it?

3 replies

by d.walker5

I assume your're not getting an error message? The problem may be with you Keyboard/mouse see KB 320877. Also, check your BIOS and turn off the feature that treats removeable disks as fixed. Better yet.check will Dell for a BIOS upgrade.

by cnowicki04

There is no error message. KB 320877 deals with a USB keyboard with a PS/2 mouse plugged into it or a USB mouse in the USB chain; both devices are PS/2 and no USB is enabled. I had updated the BIOS from version A06 to A10. I could find no BIOS option to designate disks as removeable.

by eckostar

Have you tried running Dell 32 bit diags? You may actually be having a problem like cyclic redundancy erros, and the comp is just unable to surpass the errors. If you can run the diags, and everything passes, try running through with fdisk, format, and all of the usual steps for a clean install. Let me know if this helps or what the diags tell you.

This discussion is closed to new replies.