General discussion

Locked

installing netware 4.11

By g.burton ·
i am trying to install netware 4.11 and it keeps hanging.

when we install it ask which langage to use. soon as we choose english it hangs??

we have got all the right drivers, enough ram, hard drive space, etc.

This conversation is currently closed to new comments.

12 total posts (Page 1 of 2)   01 | 02   Next
| Thread display: Collapse - | Expand +

All Comments

Collapse -

installing netware 4.11

by bdgray In reply to installing netware 4.11

If you are using an AGP video card try using a cheap old PCI ATI or S3 video card.

Collapse -

installing netware 4.11

by g.burton In reply to installing netware 4.11
Collapse -

installing netware 4.11

by paco454 In reply to installing netware 4.11

You should have only Dos 6.x or higher(not Win9x)installed and CDrom drivers configured correctly in cofig.sys and autoexec.bat. Not from a Boot disk.

Collapse -

installing netware 4.11

by g.burton In reply to installing netware 4.11

dos 6 or less only windows 95 first addition

Collapse -

installing netware 4.11

by mike.taylor7 In reply to installing netware 4.11

Check your Config.sys & Autoexec.bat to ensure that no memory drivers are running. I.E. himem.sys, ramdrive, emm386 etc...

Also put the following lines in config.sys:

Buffers=40
Files=30

Hope this helps

Mike

Collapse -

installing netware 4.11

by g.burton In reply to installing netware 4.11

dos=higj and himem sys needs taking out

Collapse -

installing netware 4.11

by gaplid In reply to installing netware 4.11

First don't use windows 95/98 operating system , cause it doesn't work well with Netware, and in config sys file thereare to lines files=30 buffers=30,

Collapse -

installing netware 4.11

by g.burton In reply to installing netware 4.11
Collapse -

installing netware 4.11

by papachuck In reply to installing netware 4.11

The Licence diskette has a OS on it... Boot from that and fdisk-format your dos partition with the Licence disk....Besides the settings above you will need CD software to configure the dos drivers for the CD Rom..Also the MSCDEX.exe from a win95 disk will work with the old version of DOS....Good Luck....Chuck

Collapse -

installing netware 4.11

by g.burton In reply to installing netware 4.11
Back to Networks Forum
12 total posts (Page 1 of 2)   01 | 02   Next

Related Discussions

Related Forums