First off, you need to have the jumpers on the drive set properly.
Western Digital drives are notorious for not working when the jumpers are set wrong.
If you have 2 drives connected to the same cable, one must be set as master with slave present, and the other set as slave.
I have also seen both Maxtor and WD drives not play well when slaved to other brands of drives.
Once the jumpers are correct, the BIOS should see the drive. The next issue is is the BIOS or the OS limited to 132GB drives?
If you attempt to partition the drive and and the drive size is a lot smaller than you expect, you can assume that you are BIOS or OS limited.
Western Digital does have a utility you can download that will help you use the full capacity of the drive.
While your there, download the users manual for your hard drive.
When you buy a hard drive, you normally only get the manual and CD when you buy a retail packaged drive. When you buy a white box or OEM drive, you get just the drive.
Chas