Question Locked
0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I am trying to replace my old IDE DVD drives with a Samsung SH S-203 DVD RW drive. My hard drives are currently connected to IDE, so all the SATA ports were unused on the MB. I connected the new SATA DVD RW to the Primary SATA channel on the MB and to the power supply. I then went into the BIOS and enabled the SATA controller. Windows XP Pro SP2 loads up fine (as before) but no DVD drive is recognised! I tried finding new hardware but no joy. Help pelase?
3 replies
by plcanonica Accepted solution
Clarifications
by thechas Accepted solution
Like many of the motherboards with extra IDE channels, the first generation of motherboards with onboard axillary SATA controllers, many were designed to be used for RAID arrays.
Most of the time, a RAID controller just will not work with optical drives.
The best way around this is to install a PCI SATA controller.
Chas
by nentech Accepted solution
They are marked SATA1,SATA2
This board has 2 types of SATA connectors
Raid and non raid
The right ones are by the floppy connector
Col
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending
Question Locked
Setting up a wifi bridge with switch correctly
0 helpful
5 replies
Question Locked
Experiencing Bottleneck with RTX 4060 + i5-12400F - Need Advice
0 helpful
5 replies
Question Locked
Keyboard
0 helpful
3 replies
Question Locked
Core i7 12700KF or Core i7 12700F ?
0 helpful
9 replies
Question Locked
Looking for honest opinions on gaming PC
0 helpful
5 replies