Question Locked

Installing XP Pro on SATA, Asus M2N4-SLI MB

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi All,
I'm supposed to be retired, but still help friends in trouble. Im not scared of XP Pro - I've recovered a number of "dead" systems & installed/reinstallaed about 6 systems this last 12 months, but this one has me stuck!

My friends system has an Asus M2N4-SLI M/BRD with 2 Gb DDR2 RAM, a dual-core Athlon 64 4600 and a 250 GB SATA Maxtor drive. It has been running XP Pro with an identical drive, but for various reasons, he wants a clean install on a newly formatted drive (NTFS).
So I created a RAID driver floppy, with the MB CD, plugged in the new HDD to the first SATA cable and started installing, using a brand new XP Pro SP2 (OEM) CD in the DVD/RW drive - having checked that the BIOS recognises both the SATA drive and the IDE DVD/RW (seen as "CDROM"). The first part of the install is OK (used F6 & loaded SATA-Raid controller drivers - 2 of them) but at the first reboot I get "missing operating system".

What I have Tried!!
Booted from Win98 floppy, deleted NTFS partition. Created new NTFS partition (using Ranish Partition Manager). Reran setup - same error!
Same again, but made a FAT32 partition (formatted it). Retried install - same error.
Tried again with only one RAM stick (1 Gig).
Same error!
Told XP to convert partition to NTFS - same error!
Told XP to delete partition and create and format a new NTFS partition (seems to work fine). Same error on first boot!

The system does not seem to be able to use the SATA controller drivers in XP ?!? But the original (pre-installed) HDD runs fine on the same SATA cable!!

Any clues anyone?

Nick

PS. If anyone has a fix using Linux, that's fine, I have Ubuntu & Fedora, but I'm a bit rusty on the CLI (used to work on Sun workstations about 15 Yrs ago).

4 replies

by niklaw

Hi,
Well - I got noe help! I was rather surprised that no-one could think of anything else to try - I certainly could and really just had the idea that something involving XP installation must have happened to some professional with SATA drives becoming the norm now! Guess not - or I frightened some of you.

Anyway, for info, in case someone else has a similar problem, the answer seems to be, DON'T format an SATA drive in Win XP before trying to install a new XP Pro system on it!
With this ASUS motherboard, be careful that the BIOS settings are correct (the SATA controller is also a RAID controller) and be sure the drive is completely blank (no partitions). Start XP installation, install the RAID driver from the ASUS CD (I used a floppy copy) and XP will partition the new drive, format it and install with no more problems (as I would have expected originally....:) ). If it doesn't work, you have incorrect BIOS settings, so try other settings - and start again by deleting all partitions from the drive (you could use the Linux GParted!)!

This reminds me of when I was chief engineer of a business computer company in the 70's. If local engineers couldn't fix a system, I had to find a way - I always did, eventually (it didn't help that many of the customers were lawers & were likely to sue you if the computer wasn't fixd quickly - that's really being put under pressure!).
Sometimes it is good - for experiences sake - to be left to your own devices! There is always a way!

Nick

by dabouncer

I have been working on this problem for hours. I was about to give up and just go back to ide drives.. You are a lifesaver.. or atleast a hair saver.

This discussion is closed to new replies.