Networks

General discussion

Gravatar
Locked

INTERNET SHARING

By npanchal7 ·
I GOT ONE JOB TO SHARE INTERNET. IT IS ON 9 FLOOR TOWER. THE INTERNET CONNECTION IS SITUATED IN GROUND FLOOR AND EACH FLOOR IS GEETING ONE CABLE FROM GROUND FLOOR. THE EACH FLOOR HAVING 4 P.C. BUT ON THE EACH FLOOR THERE IS NO SWITCHING HUB OR NORMAL HUB AND INTERNET CONNECTION IS BEING PROVIDED BY USING SOCKETS JUST CONNECTED PARALLEL LIKE WE ARE USEING ELECTRICAL CONNECTION SHARING. I DON'T KNOW WHAT IS THAT DEVICE AND THE TOTAL LENGHT FORM THE GROUND TO SOCKET IS ABOUT 80 MT. SO WHAT SHOULD I DO TO GIVE CONNECTION SHARING. IS IT POSSIBLE TO SHARE INTERNET LIKE ABOVE MENTIONED OR I HAVE TO PUT ONE SWITHING HUB OVER HERE?

This conversation is currently closed to new comments.

5 total posts (Page 1 of 1)  
Thread display: Collapse - | Expand +

All Comments

gravatar
Collapse -

INTERNET SHARING

by TheChas In reply to INTERNET SHARING

Unless you are going to use thin-net (coax) you will need:
switch / router on the ground floor;

separate wires to each floor;

hub / switch on each floor.

Chas

gravatar
Collapse -

INTERNET SHARING

by npanchal7 In reply to INTERNET SHARING

Poster rated this answer

gravatar
Collapse -

INTERNET SHARING

by wlbowers In reply to INTERNET SHARING

This is taking for granted the internet connection is a high speed dsl or cable.

Ground Floor
1- Linksys BESFR11 Gateway/Router/DHCP Server
* 10/100 Switch 9+ ports
* APC Surge protector or Battery Backup
* Ethernet cable run to each floor.


Each Floor
1- 10/100 Switch. Port count will depend on
number of rooms that need access. Use
stackable switches if necessary.
* ethernet cable run to each room.

Good Luck Lee

gravatar
Collapse -

INTERNET SHARING

by npanchal7 In reply to INTERNET SHARING

Poster rated this answer

gravatar
Collapse -

INTERNET SHARING

by npanchal7 In reply to INTERNET SHARING

This question was closed by the author

Back to Networks Forum
5 total posts (Page 1 of 1)  

Start or search

Related Discussions

Related Forums