Discussion Locked

IP Address?

0 helpful
15 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have been hosting my own web site on a cable connection direct to my computer. To get to it If one used http://99.99.999.99/myweb/, people both on the local network and outside on the internet could acess my web site.

I recently added a Linksys router now and instead of connecting directly to my cable modem I go through the router. I am not able to access my network from the internet using http://99.99.999.99/myweb/. when I call up my ip address I get 192.168.1.100 which I can use on the local network but doesn't work from the internet.

Any thoughts on what might be happening.

15 replies

by matt_s

Your linksys router is providing internet access via NAT...network address translation. Your router is all that is visible to the outside world. Therefore you need to map port 80(http) to your webserver on your internal netowork.

I'm not familiarwith your router, but there should be some provisions for port mapping or virtual servers or something. Check our your documentation.

by cg it

Matt S has it. Your router is blocking inbound traffic [closed port 80]. You have to configure your router to foward inbound http traffic [port 80].

The linksys router manual will have all the steps necessary for setting up inbound traffic [or use a DMZ].

by shiuhrong

There should be a DMZ, you need to type in ur internal IP to the DMZ host IP address and enable the DMZ, you need to type your IP address and the port 80 into the virtual server setting to enable others people to access your website. That is my setting on my Accton Cheetah broadband router.

by saihib

KB10933123
Go to the Linksys website and under support/knowledge base do a search on "port forwarding" The article number is above but I
couldn't find a way to search for it.

by saihib

KB10934021
This article tells how to set up a web server behind the router. Do a search for:

Setting up a web server behind the Router

by fenaikh

Hi

You may have a Windows XP firewall or a port forwarding problem.

1. How to turn off Windows XP firewall.

If you are running Windows XP then you should turn off the built in Windows XP firewall.
Start -> Control Panel-> Network Connections -> View Network connections -> Right Click LAN icon "LAN or High Speed Internet" (the one that says "Enabled") -> Properties -> (tab) Advanced -> Uncheck "Protecte my computer and network by limiting or preventing ..."

The Internet Connection Firewall Can Prevent Browsing and File Sharing
http://support.microsoft.com/default.aspx?scid=kb;en-us;Q298804

2. port forwarding which you may need to use static IP address

How to Configure a Linksys Router (tutorial)

http://www.newircusers.com/router.html

Linksys cable/DSL Router Help - Port Forwarding
http://www.practicallynetworked.com/support/linksys_router_help.htm

http://www.practicallynetworked.com/support/linksys_router_help_pg4.htm

" Forwarding

Port forwarding sets up public services on your network. When users from the Internet make certain requests of your network, the router will forward those requests to the appropriate computer. The router's DHCP function must be disabled to use Forwarding. Forwarding is generally used to set up a webserver, ftp server, or e-mail server on your network.

To add a server using Forwarding:

Enter the port number used by the server. On the same line, enter the IP Address of the server that you want the Internet users to be able to access.
Configure as many entries as you would like until all of the link entries are filled.
Click the Apply to save the settings."

so more info :

http://www.linksys.com/support/support.asp?spid=1

Note1:
***Very Important NOTE *********
After you copy the URL a space or a %20 maybe gets inserted in the URL when you paste it into your browser. Delete any spac

This discussion is closed to new replies.