Windows Forum

Ask something
Discussion Locked

IP Control

0 helpful
4 replies

by suria

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Is there any way that i can control only certain ip address can connect to my server. For example i just want to connect ip range from 107.103.31.1 to 30.

Thanks

4 replies

by gigelul

If you use DHCP server you can control the IP allocation for connection from there. Also you must enable workstations to obtain an IP from DHCP.

by rgrowcock

You can also set the security options on the folders to only accept the IP addresses you specify. If you are using IIS, that function is also available. You can restrict by range, as long as you have the subnet mask. You can also restrict on a router using ACLs if it is a Cisco box and you have access to it. So yes, there are several ways to restrict to IP address. If you can provide a little more detail, OS, topology, etc. you will probablly get a more detailed answer. Roger

by techkid

If you're running windows 2000 server you can use the MMC snap-in IPsec. If it's windows NT server you may look for firewall software on the net

by suria

My PDC & BDC is Win NT4.0. We are using Wins. Previously we are using netbios. I just want to allow my user to access my server and did not want other people to access it.

This discussion is closed to new replies.