ipconfig error in Windows ME

A hardware pb with your network device?

This could be an ip conflict

If U R using Static self assigned IP addresse's try checking if your network has a scope of IP addresses on the DHCP

Alternatley you may need to run on 2000/NT ipconfig release and refresh
If w98 try winipcfg at the run prompt release and renew

Hope this helps
Regards Colin

right-click network neighborhood > properties
>
a) Make sure tcp/ip is bound to the proper adapters.

b) Reinstall tcp/ip, the stack may be corrupt.

Good Luck!
- Muffster

Refer to the following:

http://www.jsiinc.com/SUBH/tip3900/rh3928.htm

(REMOVE SPACES from the pasted URL)

MAXWELL

your not on the network or if you are your not logged in. Possible DNS or WINS problem.

This question was auto closed due to inactivity