General discussion

Locked

IPX on Bay Networks Accelar 1200 switch

By rvonhorn@bayviewcapital. ·
How do I configure IPX using the IOS command line interface on a Bay Networks Accelar 1200 (Nortel Passport) switch/router? I do not have the Accelar Management software available to me nor do I have the manuals. I have gone to Nortels web site and all references I can find refer to using the management software.
Thank you.

This conversation is currently closed to new comments.

1 total post (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Comments

Collapse -

IPX on Bay Networks Accelar 1200 switch

by Jon Shorten In reply to IPX on Bay Networks Acce ...

First, what code is your 1200 running, it needs to be 2.0.7.2 or greater for IPX to work properly.

then, assuming you can get rw or rwa access to the CLI, try "config ipx [cr]" then "?" for a list of ipx configuration commands with descriptions.
I'd recommend sticking to port based VLANs with these switches, protocol based VLANs do work, but can get heavy on SSF cpu utilisation, causing the switch to hang.

Back to Networks Forum
1 total post (Page 1 of 1)  

Related Discussions

Related Forums