General discussion

Locked

IRQ conflict display adapter

By piraterx7 ·
Device manag.asked to disable 5,7,9,10,11 to find IRQ space. I disabled 11, sis5597/5598 display adapter. Now she won't boot. How can I enable it. Safe mode won't let me. Correct E-mail is piraterx7@yahoo.com.

This conversation is currently closed to new comments.

5 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Comments

Collapse -

IRQ conflict display adapter

by csmith In reply to IRQ conflict display adap ...

Ther is something wrong here.
IRQs should not be disabled to make space.
Rather just the opposite.
Where does it freeze in the boot?
The only way to get this machine to boot may be to remove card(s) to reduce the IRQ usage/conflict.
The best place to start is usually removing the com port / IRQ for the MODEM then the Printer then the sound card, or they are onboard turn them off in the BIOS.
WARNING! There is going to be some work involved in getting them all working again.

I have hadto resort to manual settings in both the BIOS and Windows to solve problems like this.

Regards, Chris

Collapse -

IRQ conflict display adapter

by piraterx7 In reply to IRQ conflict display adap ...

The question was auto-closed by TechRepublic

Collapse -

IRQ conflict display adapter

by TechV In reply to IRQ conflict display adap ...

hi,
I hope problem should get resolved by re-installing the display adapter in a diffrerent slot along with fresh drivers.

hemant

Collapse -

IRQ conflict display adapter

by piraterx7 In reply to IRQ conflict display adap ...

The question was auto-closed by TechRepublic

Collapse -

IRQ conflict display adapter

by piraterx7 In reply to IRQ conflict display adap ...

This question was auto closed due to inactivity

Back to Desktop Forum
5 total posts (Page 1 of 1)  

Related Discussions

Related Forums