Discussion Locked

Laptop restarting when I choose shutdown

0 helpful
8 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
We have Dell laptops with win95 on them. Recently we have upgraded a Novell client, Norton AntiVirus, Installed the dell management agent,and upgraded internet explorer.Now when we choose shutdown the machines are restarting. Even after disabling power management in the bios and taking the battery info out of startup...What do I try next?

8 replies

by todd kimbrell

Oh boy did i have fun with the same problem. here are some things to try. And please try one at a time to ensure you dont stomp on the solution. :)

Remove all the shortcuts in the startup folder (put them on the desktop or somewhere safe.

Reboot the computer and then when windows completly boots up. Try to do a shut down.
if that did the trick, it is one of the startup programs, put one back at a time to determine which one it is. When you locate the problem child, seek info on the appropriate support site.

Didnt Work?
Try adding a sound event to your shut down process. a simple tada or ding will do just fine.
If that worked, then great, stick with that.

didnt work?

Reboot the computer in safe mode and then try a shutdown.

If that worked, then you may have a memory conflict.

RULE OUT EMM386-RELATED MEMORY CONFLICTS

A memory conflict sometimes exists when EMM386.EXE is not loaded from the CONFIG.SYS file. To test for this, launch SYSEDIT. Click the CONFIG.SYS window. In the CONFIG.SYS file, make sure the following lines exist in this order, at the very beginning of the file:

DEVICE=C:\WINDOWS\HIMEM.SYS
DEVICE=C:\WINDOWS\EMM386.EXE NOEMS X=A000-F7FF
DOS=HIGH,UMB
If you do not have a CONFIG.SYS file, create one with these three lines. Save the modified CONFIG.SYS file and close SYSEDIT. Reboot, then test Windows shutdown. If the system hangs, restore your CONFIG.SYS file to its original configuration. If it shuts down properly then you are good to go.

Lets try this and see what happens! tk

by nettek

Check Dell's website for this problem. The solution may be something as simple as flashing the laptop with the latest BIOS update.

by ecurlycue

Well after many hours it turned out to be the Dell Management Agent that was installed. So All you have to do is uncheck all the dell management items in Startup.
Thank you for your suggestions

by ctmoore1998

Check the Novell Client in Network properties and look for a 'wake on network activity' setting to be enable and disable that option. Also check bios of PC for a wake on lan activity in power management, finally also check the Dell management agent configuration as well, I think though the problem is power management related in either bios or the Novell client. Hope this helps you out.

This discussion is closed to new replies.