Hardware

Ask something
Question Locked

Laserjet Problem

0 helpful
2 replies

by paulbhite

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
We have an HP 8150n that has a solid output on the LCD display ... no information, just solid blocks. No communication to computers either. All 3 lights stay on also. Removing / reseating memory and expansion boards do not help. We are considering replacing the large removable expansion board the memory and expansion cards sit on (not sure about terminology here). Any thoughts?

2 replies

by mjd420nova

I've encountered the same problem and was unable to get HP to give me any help. I started by replacing that expansuon card and it solved the problem. This may work for you or it may not. If you can find a supplier that will refund your money if it doesn't solve the problem, go for it. Where I work, we had a number of units that I was able to "borrow" parts from to find the fault.

This discussion is closed to new replies.