Question

Locked

LCD Sleep Mode

By 1pataz ·
I have a Hanns-G JW197D LCD. It looks and works great except when we turn the power off to the monitor and then try and turn it back on or it goes to sleep on it's own. It says "No signal input check video cable". We have to reboot the computer to get it to come back on.

I set the Windows Power Options Properties to never turn the monitor off and Hibernation is set to Never turn monitor off so it doesn't go into sleep mode any longer but still will not come back on if we turn it of manually to save power.

This on a Dell Optiplex Gx240 running Win XP Pro SP2 with a 128MB Sapphire Radeon 9550 AGP graphics card. LCD is connected via HDMI.

Any assistance you can provide would be appreciated.

pataz

This conversation is currently closed to new comments.

4 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Answers

Collapse -

This has nothing to do with the computer

by OH Smeg In reply to LCD Sleep Mode

It is the monitor that is beginning to break down. The unit either needs to be repaired or replaced if the cost of repairs makes it Uneconomical to repair.

Col

Collapse -

Sent email to mfg

by 1pataz In reply to This has nothing to do wi ...

Thanks for your reply. It's brand new and work fine otherwise. I have a email into the mfg as well. I guess we'll see what they say.

Thanks

Collapse -

re: LCD Sleeping

by ThumbsUp2 In reply to LCD Sleep Mode

You said you set Hibernation so it never turns off the monitor. But, is the computer going into Hibernation? If so, there's no signal sent to the monitor, so it displays that fact. Try turning off Hibernation all together.

Back to Hardware Forum
4 total posts (Page 1 of 1)  

Related Discussions

Related Forums