General discussion

Locked

Lexmark Z22 lights blinking

By denej2213 ·
I just installed new color cartridge in my Lexmark Z22 printer and the power and paper out lights are both flashing, i transferred the cartridge to other printer and the same thing happens, what can i do to fix this, nothing is wrong with the printer because i installed another cartridge and it turned out okay but i want to save and use the other color cartridge (considering the cost of this)

This conversation is currently closed to new comments.

3 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Comments

Collapse -

Lexmark Z22 lights blinking

by Digital_DNA In reply to Lexmark Z22 lights blinki ...

Return your color ink cartridge. I'd bet 100 bucks its bad. This happens more often then it should. If you want to try one other thing first, I would recommend completly disconnecting the power to the printer for about 60 seconds (remove color ink cartridge first). When the 60 seconds passes, apply power again, turn the printer on, re-install the cartridge. If that doesn't solve the problem, return the defective cartridge.

regards
ebcdic

Collapse -

Lexmark Z22 lights blinking

by denej2213 In reply to Lexmark Z22 lights blinki ...

yeah you're right the cartridge is really defective and will return it first thing in the morning, thanks!

Collapse -

Lexmark Z22 lights blinking

by denej2213 In reply to Lexmark Z22 lights blinki ...

This question was closed by the author

Back to Hardware Forum
3 total posts (Page 1 of 1)  

Related Discussions

Related Forums