7 replies
by joseph moore
There probably are apps you can get that would limit the bandwidth on the XP clients, but that is not the real fix for your problem.
Since all of your machines are on a hub, then they are all part of the same "collision domain" and THAT is the big problem. You see, communication through a hub occurs one client at a time, because hubs don't separate the packets from all machines. Hubs let the packets all come in at once. It then allows one machine access through the hub (going to its destination), then it lets the next machine, and the next, and the next, etc.
So, only one machine can communicate at a particular time. That is a collision domain.
Hubs are bad if you want to get any reliability in client communications.
You need to get a switch. That is the main difference between a hub and a switch. A switch is designed so that each PORT on a switch is a DIFFERENT collision domain! That way, clients can communicate through the switch fabric at the same time; there is no waiting for your turn with a switch. Communications are faster, more reliable.
So, yes, I am recommending you get a switch. I know you didn't want to get more hardware, but if you are serious in stabilizing client communications and bandwidth, then you need to get a switch.
hope this helps
by icelemon
by icelemon
by icelemon
thanks Joseph, i need to get a switch instead.do you know any software available that solves this case for the moment? by the way thanks for the advice. i will keep it in mind.
cheers Darrell. but is a switch a router as well? iam well confused. are they BNC-related cables?
by icelemon
by icelemon
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending