15 replies
by baotran107
by nwntz
by fenaikh
Hi
It seems that you may have a problem with a software or a hardware driver loading.
pls raed this article to troubleshoot the problem. In the other had you may need to do some tuning too:
1. clean temp and internet temp file.
2. scandisk.3. defrag hard disk.
Troubleshooting Windows 98 Startup Problems
http://support.microsoft.com/default.aspx?scid=KB;en-us;q188867
more info ...
Top Articles for Windows 98
http://support.microsoft.com/default.aspx?scid=KB;en-us;q187602
Good luck
Mohamed
Note1:
***Very Important NOTE *********
After you copy the URL a space or a %20 maybe gets inserted in the URL when you paste it into your browser. Delete any spaces or such characters from the URL for the page to be loaded.
***Very Important NOTE *********
by nwntz
by jlouis45
by nwntz
by opatzg9
OPen a MSDOS prompt
perform the following:
cd\windows
del *.tmp
That removes files created from scandisk which keep getting tossed in the windows directory till it strangles your performance.
then:
CD\windows\temp
del *.*
That clears out thefiles which are supposed to be on your computer only temporarily while installing software.
In this second command make sure you are in the windows temp directory before you issue the del *.* command as that is teling it to erase everything.
Then run scandisk, defrag, if disk space permits set your virtual memory thru start\setting\control panel\system\performance\virtual Memory\ choose to let you control it and set the upper and lower limits to 1gig, otherwise a minimum of double your ram.
That should help a bit. You could use nortons system tools to help clean up the registry also if you have them. Otherwise reloading windows and your current applications after backing up you data is about the only way to bring the real speed back.
Good Luck
by nwntz
by ann777
run MSCONFIG (start --> Run --> msconfig) and check the selective startup box. Then go to the startup tab and remove everything but systray and explore. Then test and see what does not work properly.
All the programs listed on your startup are TSRs that consume memory at boot and essentially tie up resources. Remove anything that you don't run regularly (like daily). Most programs do not need to be in Startup in order to run; yes, when you first start a program that was in that tab, it'll take a bit longer to load... but at least it won't be using resources when you are not actively running the program.
by nwntz
by tearley
I agree with Anna777, however when your in MS config edit config.sys, don't worry config.sys is usually only a few lines long so shouldn't be very confusing. Here is an example of a resonable and simple config.sys.
Device=c:\windows\himem.sys /testmem:off
device=c:\windows\emm386.exe noems
DOS=high,umb
files=70
buffers=20,0
country=044,437 c:\windows\country.sys
unless your playing games in DOS you shouldn't need anything else. This will also improve Windows performance.
by nwntz
by natedogg2277
by nwntz
by nwntz
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending