General discussion

Locked

Log Netware Server Startup

By Baadil ·
I would like to find a way to log everything on a Netware Startup. This log should include everything what happens after you type Server.exe to start the server.
(Conlog does not provide everything line which goes through the console at startup)

This conversation is currently closed to new comments.

5 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Comments

Collapse -

Log Netware Server Startup

by dacarr In reply to Log Netware Server Startu ...

Unless you're going to splash out on a piece of 3rd party software you are stuck with the following bits.

Run conlog early from the autoexec.ncf
load DSTRACE and run it's output to a file
run NCP TRACE and DUMP to a log file

all details are'help supported' at the server

Good luck

David Carr
LBWF - UK

Collapse -

Log Netware Server Startup

by Baadil In reply to Log Netware Server Startu ...

Poster rated this answer

Collapse -

Log Netware Server Startup

by ejegan In reply to Log Netware Server Startu ...

Have you checked out the "ENTIRE=YES" command line switch? I *think* that it will capture the STARTUP.NCF info as well.

Edward J. Egan, CNE

Collapse -

Log Netware Server Startup

by Baadil In reply to Log Netware Server Startu ...

Poster rated this answer

Collapse -

Log Netware Server Startup

by Baadil In reply to Log Netware Server Startu ...

This question was closed by the author

Back to Networks Forum
5 total posts (Page 1 of 1)  

Related Discussions

Related Forums