Windows Forum

Ask something
Discussion Locked

Logging in W95/network

0 helpful
11 replies

by arnaud.mesropian

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi,

I just can't find any way to get the login box (the one for the network, asking for domain name and so on) when W95 starts.
I have to do an ugly "start>shut down>close all programs and log on as a different user" to get it. Is there any way to get it directly when W95 starts?
I would appreciate any suggestion.
Thanks

11 replies

by mike o

Go into the control panel and go to the network properties. In the first tab where it says "Primary Network Logon" change it from "Windows Logon" to "Client for Microsoft Networks." This will throw up the login screen every time.

by sixfourtykilo

A couple simple steps to check:

- Are you using Microsoft Family Logon? If you are, you will not receive a login prompt.

- Make sure that your nic drivers are not having problems and that you CAN connect to a network.

640k

by nettek

My guess is that you have a corrupt network component. Try the following:
1. Under the Properties of Network Neighborhood, remove Client for Microsoft Networks and any network protocols you have installed.
2. Reboot.
3. Add the network components again.
4. Reboot.

by goginenisridhar

here i am giving points wise
1)Go to the start button
2)there you clik settings
3)there you click control panel
4)in that network
5)open that network there configure button
there you will get primary network log on
should be"client for microsoft networks"you select and restart now you will get windows
log on

by glenmark26

in start menu go to run type regedit then enter
in inbox of regedit find the autologon then if u found the autologon delete this file.then reboot your machine.

This discussion is closed to new replies.