1. Add the following entries to the Lmhosts file:
10.0.0.1 PDCName #PRE #DOM:Domain-name
10.0.0.1 "Domain-name \0x1b" #PRE
**********************************************
NOTE:The Domain-name in this entry is case sensitive. Make sureyou enter it in upper case per Q262655 PDC Names Entered in LMHOSTS File are case-sensitive.
**********************************************
NOTE: Spacing of these entries is imperative. Replace 10.0.0.1 with the IP address of your primary domain controller (PDC), PDCName with the NetBIOS name of your PDC, and Domain with your Windows NT domain name. There must be a total
of 20 characters within the quotations (the domain name plus the appropriate number of spaces to pad up to 15 characters plus the backslash plus the NetBIOS hex representation of the service type).
To help determine where the 16th character is, copy the following line to your
LMHOSTS file:
# IP Address "123456789012345*7890"
Line up the double quotes (") by adding or removing spaces from the comment line, and place the \ on the 16th column (the column marked with the asterisk). You must use SPACES after the name and before the \, not a tab.
After this run a command prompt and this command:
"nbtstat -R" (without the quotation marks)
Make sure your entries are correct! That is our major problem here.
