Question Locked

MATSHITA UJDA765aDVD/CDR DVD Rom Does not recognize DVD-R

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi,
I have HP Compaq nc6220 Lap Top which is having MATSHITA UJDA765aDVD/CDR DVD/CD Rom.
When I try to burn my back files which are of course very big my DVD/CD Rom does not recognize any DVD and it always giving me error message" Please insert writable media into D Drive" when I fact DVD is already there in the DVD Rom.
But when I insert CR-R or CD-RW it recognized it.
Since my files are more than 1GB I cant break or burn on CD's instead I wanted to burn on DVD.
Also I am using buring softwares like Ashampoo and tried several others, even burning softwares are giving me same error message.
I tried to copy and paste into DVD but it keep giving me same error message.
Please let me know is some drivers I am missing/or something else.
I am using Windows XP Pro SP2 and I have checked the device manager everything is fine and all the drivers have been installed.

Any help would be highly appreciated.

THanks

9 replies

by older mycroft

That is why you are getting error messages.

DVD/CDR = DVD reader / CD recorder

It is recognising CD-R and CD-RW because those are the media it can work with.

[u]According to a PC Pro review in 2005:[/u]
"[i]As befits any modern layout, the three USB ports are on the sides of the case, but it's strange to see a serial port there when the more useful D-SUB VGA output is relegated to the back. [b]If you want to change the optical drive (ours had a CD burner), it's a simple matter. Firmly press the door in and the whole assembly will pop out, ready to be swapped with a different drive.[/b][/i]"

You can read the full review here:
http://tinyurl.com/2uhb6q

Either break your files down to fit onto CDs or buy a DVD recordable drive. :)

by syedali1975

Hi,
Thanks very much for the reply, I think my DVD rom can read only DVD and write CD's.
Else I would be looking for possible solution if I wouldnt know that it cant write DVD's.
You save time.

by oh smeg

You have a Combo Drive that can read DVD & CD Media and can burn CD Media but can not burn DVD Media.

These where very common with HP and some other makers products as it allowed things like Vista to be installed to the computer but didn't involve the expense of fitting a DVD Burner.

You only real alternative here is to use some Software that can Backup your Files to CD or fit either a Internal DVD Burner or a USB DVD Burner if you must burn DVDs but if you go to this extend it would be cheaper to buy an External HDD and use this to make your Backup to. Just remember to only use it when it is needed and not leave it running all the time as the drive will have a much shorter life that way.

Col

by syedali1975

Hi,
After your reply I found out that I was looking in vain when I found out that my DVD rom can only read but cant write.

by older mycroft

If you got hold of 'Nero 7' you could split a data file over several CDs.

Just make sure you mark the CDs with the numbers in the correct order! ;)

by oh smeg

It is used in the

[b]Nero BackItUp 3 ? Complete Backup Solution[/b]

option included within Nero 8.

Even if you do not number the disc's they are numbered by the software when they are burnt so if you insert the wrong one when recovering the data you will get a prompt to reinsert the correct Disc and a notification that you have inserted the wrong one and what number it is.

Col

by older mycroft

Be there for quite a considerable time until you managed to insert the disc the software is expecting.

Then be there for quite some considerable time until you insert the next correct disc the software is expecting.

Then be there for quite some considerable time until you insert the next correct disc the software is expecting.

Then be there for quite some considerable time until you insert the next correct disc the software is expecting.

Then be there for quite some considerable time until you insert the next correct disc the software is expecting.

Then be there for quite some considerable time until you insert the next correct disc the software is expecting.

Then be there for quite some considerable time until you insert the next correct disc the software is expecting.

Then be there for quite some considerable time until you insert the next correct disc the software is expecting.

Then be there for quite some considerable time until you insert the next correct disc the software is expecting.

By this point, admittedly you won't waste quite so much time because your bundle of potential correct discs will have dwindled somewhat.

Then be there for somewhat less considerable time until you insert the next correct disc the software is expecting.

Then be there for quite some considerable time until you insert the next correct disc the software is expecting.

Then be there for quite some considerable time until you insert the next correct disc the software is expecting.

Then be there for quite some considerable time until you insert the next correct disc the software is expecting.

Then be there for quite some considerable time until you insert the next correct disc the software is expecting.

Then be there for quite some considerable time until you insert the next correct disc the software is expecting.

Assuming the CD drive tray hasn't ignited by this point you should be on the home leg but stoically continuing and wishing you had listened to Old Mycroft when he told you to number the discs. ;)

This discussion is closed to new replies.